Sony SLV-ED313MJ manual Specifications, System, Inputs and outputs, General, Supplied accessories

Page 49

Specifications

System

Colour system

PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system

B/G, D/K, I Channel coverage

B/G: VHF E2 to E12/UHF E21 to E69/ CATV S01 to S05, S1 to S41

D/K: VHF R1 to R12/UHF R21 to R69

I:VHF SA4 to SA13/UHF B21 to B69/ CATV S01 to S05, S1 to S41

RF output signal

UHF channels 21 to 69 (B/G, D/K, I) Aerial out

75-ohm asymmetrical aerial socket

Inputs and outputs

LINE-1 IN

VIDEO IN, phono jack (1)

Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO IN, phono jack (1) Input level: 327 mVrms

Input impedance: more than 47 kilohms

LINE OUT

VIDEO OUT, phono jack (1)

Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO OUT, phono jack (1) Standard output: 327 mVrms Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

01GB07ADI-ED313.p6549

General

Power requirements

110 – 240 V AC, 50/60 Hz Power consumption

13 W Operating temperature

5°C to 40°C

Storage temperature –20°C to 60°C

Dimensions

Approx. 430 × 97 × 292 mm (w/h/d) including projecting parts and controls

Mass

Approx. 4.1 kg Power back-up

Built-in self-charging capacitor

Back-up duration:

up to eight hours at a time (for SLV-ED215PS/ TH and ED115PS only)

up to 24 hours at a time (it may be differ in actual performance) (for SLV-ED313ME/MJ/SG only)

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2) Aerial cable (1)

Plug adaptor (1) (for SLV-ED313ME/MJ only)

Design and specifications are subject to change without notice.

Additional Information

10/1/01, 14:27

49

SLV-ED313ME GB 3-065-583-11 (1)

Image 49

Contents SLV-ED313MEGB 3-065-583-11 Video Cassette RecorderSafety PrecautionsInstalling SLV-ED313ME GB 3-065-583-11Table of contents Checking your model name UnpackingGetting Started Using the remote commander Setting up the remote commanderInserting the batteries To operate Set TV/ Video toConnecting the aerial Connecting the VCRAdditional connections To a TV that has audio/video input jacksTuning your TV to the VCR If your TV system is Select Selected TV system To obtain a clear picture from the VCRBefore you start… Selecting a LanguageTo check if the channels are preset correctly Presetting channelsTip Presetting all receivable channels automatically Presetting channels Channel SET Presetting channels ManuallyChannel coverage System B/G System D/K Press Prog +/- to select the programme positionIf the picture is not clear Disabling unwanted programme positionsSetting the clock Started Basic Operations Playing a tapeREW Stop REW Color a Eject X Pause x Stop SystemTo set the colour system Additional tasksTo play an NTSC-recorded tape Basic Operations SLV-ED313ME GB 3-065-583-11To use the time counter Playing a tapeProg + Display REC Speed z REC Recording TV programmesTo check the remaining tape length To stop recordingTo watch another TV programme while recording To save a recordingTips To record Ntsc colour system programmesSetting the Easy Timer Recording TV programmes using the Easy Timer functionBasic Operations REC SpeedEasy Timer knob Programme Number Buttons Setting or changing the Easy ClockProg + Do this on the VCR CommanderTo cancel the timer setting To check or change the timer settingTo use the VCR after setting the timer Tips Setting the timer manually Daily/weekly recording Search Operations To stop the Search function Searching for the current position on a tapeKnob Tape meterTo stop searching Searching using the Blank Search functionBlank section Last recorded Programme Search OperationsUsing the Index Search buttons on the remote commander Searching using the index functionPress xSTOP Using the Search Mode button and Easy Timer knob on the VCREasy Timer knob Searching using the Time Search functionTo resume normal playback Playing/searching at various speedsAdditional Operations REW SlowTo cancel the duration Setting the recording duration timeTo extend the duration RECChecking Changing/ cancelling timer settings Programme Will be cut off When the timer settings overlapAdjusting the tracking Adjusting the pictureAbout the Adaptive Picture Control APC function Menu choices Changing menu optionsMenu option Set this option to Editing with another VCR How to connect to record on this VCRThis VCR Recorder Other VCR Player Before you start editing Operation When recording on this VCRTo stop editing Clock Power Playback Symptom Remedy TroubleshootingAdditional Information Recording Timer recordingOthers Symptoms caused by contaminated video heads Sapphire tape cleanerHead Condition Sensor Supplied accessories SpecificationsSystem Inputs and outputsFront panel Index to parts and controlsRear panel Display windowRemote commander V, W, X, Y, Z Index