Recording TV programmes using the Easy Timer function (continued)
To stop recording
To stop the VCR while recording, press x STOP.
To check or change the timer setting
Push the EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then
You can also change the timer setting using the TIMER SET/CHECK menu. For details, see page 40.
To cancel the timer setting
To cancel the Easy Timer setting while entering a setting, press CLEAR on the remote commander or press PROGRAM + and – on the VCR at the same time.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press ?/1. The t indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR.
You can also do the following tasks while the VCR is recording:
•Reset the counter.
•Display tape information on the TV screen.
•Check the timer settings.
•Watch another TV programme.
To watch the recorded programme right after recording with the Easy Timer
The SEARCH MODE indicator starts flashing when the VCR finishes the Easy Timer recording. To watch the recorded programme, push the EASY TIMER knob. The VCR turns on, starts searching, then automatically starts playback from the beginning of the recording. For details, see page 32.
28
Basic Operations
28 | 10/1/01, 14:25 |