Searching using the Blank Search function
EASY TIMER
knob
This feature enables you to find a blank section on your tape.
1 Press SEARCH MODE repeatedly until the BLANK indicator appears in the display window.
The SEARCH MODE indicator lights up.
SEARCH MODE
SP START
APC
2 Push the EASY TIMER knob on the VCR.
The SEARCH MODE indicator turns off. The VCR
“BLANK” and the remaining time of the blank section appear alternately in the display window for about one minute.
SP START
APC
n
APC
To stop searching
To stop the VCR while searching for a blank section, press x STOP.
Notes
•To display the remaining time correctly, you may have to select the TAPE LENGTH in the SET UP MENU according to the type of the tape that you are using. For details, see page 43.
•In step 2, “FULL” will appear in the display window for about one minute, if:
–there is no blank section available on the tape.
–the remaining time of a blank section is less than one minute.
•The VCR can only detect the blank section between the end of the tape and the end of the last recorded programme.
Blank section
34
Last recorded | End of tape |
programme |
|
Search Operations |
|
34 | 10/1/01, 14:25 |