Panasonic DMR-ES40V Plug-in Auto Tuning, Press CH, W, X to select an RF output channel number

Getting started

STEP 2 Plug-in Auto Tuning

DVD/VHS POWER TV

[2]Press [CH, W, X] to select an RF output channel number.

Getting started

Í POWER

INPUT SELECT TV/VIDEO CH		VOLUME
VHS	OPERATION	DVD	DVD
	SELECT
		TRACKING/V-LOCK
		PLAY	CH, W, X
DIRECT NAVIGATOR		AUDIO
		FUNCTIONS
CANCEL/RESET	VCR Plus+

Connection (without Audio/Video cable):

Select “CH3” or “CH4” which displays the screen on the right.

Connection (with Audio/Video cable):

Select “OFF”

The unit’s display

The unit’s display

TOP MENU
3, 4
ENTER	RETURN
SUB MENU
S
SCHEDULE DISPLAY STATUS	TIME SLIP
	JET REW

After plugging the unit into your household AC outlet and pressing [Í, DVD/VHS POWER] to turn the unit on for the first time, the unit assists you in setting the on-screen language, and automatically tunes in all the channels it can receive and sets the clock.

The unit automatically determines the type of transmission (airwaves or cable) and puts them into channels as follows.

	Band	Channel
Antenna Mode	VHF	2 to 13
(Airwaves)	UHF	14 to 69
	VHF	2 to 13
	CATV LOW BAND	95 to 99
CableTV Mode	CATV MID/SUPER BAND	14 to 36
	CATV HYPER BAND	37 to 65
(Cable)
	ULTRA BAND	66 to 94
		100 to 125
	SPECIAL CATV CHANNEL	1

Preparation

≥Press [DVD].

≥Turn on the TV and select the appropriate video input to suit the connections to the unit. (Example: AV input, CH3 or CH4)

≥If you connect the unit through a cable TV box or satellite receiver (l 13), tune to your local PBS for Auto Clock Setting to work.

If there is no local PBS, set the clock manually (l 44, “Set Clock Manually”).

[1]Press [Í, DVD/VHS POWER].

Select Language

Seleccione el idioma

Sélection de Langue

English

Español

Français

Press ENTER

Pulse ENTER

Appuyer sur ENTER

Each time you press the button:

CH3 (Default setting) (# CH4 (# OFF

^ -----------------------------------------------J

[3]Use [3, 4] to select the language and press [ENTER].

[4]Press [ENTER] to start Plug-in Auto Tuning.

≥The unit then proceeds with Auto Clock Setting. The time is displayed when Auto Clock Setting is finished.

Set Channels Automatically				Set Clock Automatically
			Auto Clock Setting is complete.
	Ch.	1
	Set Channels Automatically
				11/1/2005 12:15 AM
	Proceeding . . .			DST............. On
	1 1 1			Time Zone.... CST
≥DST, Daylight Saving Time, shows the summertime setting.
≥Time Zone shows the time difference from Greenwich Mean
Time (GMT).
	EST (Eastern Standard Time)		l GMT j5
	CST (Central Standard Time)		l GMT j6
	MST (Mountain Standard Time) l GMT j7
	PST (Pacific Standard Time)		l GMT j8
	AST (Alaska Standard Time)		l GMT j9
	HST (Hawaii Standard Time)		l GMT j10
	For other areas: xx hr

[5]Press [ENTER].

∫If the clock is an hour slower or faster than the actual

time

Select “j1” or “i1” in “Adjust Time Zone” in the SETUP menu (l 44).

∫If the unit couldn’t set the clock automatically

Set the time manually (l 44, “Set Clock Manually”).

∫To start Plug-in Auto Tuning again

Signal source, RF output channel, channel caption, and guide channel settings for VCR Plusi system all revert to the default values when you perform the procedure below. Scheduled recording settings are also cleared.

When the unit is on and stopped

[1]Press and hold [CH, W] and [CH, X] on the main unit for about 5 seconds.

The unit turns off.

[2]Press [Í, DVD/VHS POWER] to turn the unit on. Plug-in Auto Tuning starts.

15

VQT0R73