<MAIN MENU >
DISPLAY
TIME DATE SEARCH TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE
)FIRST TIME SET UP
Use JOG to select, and ENTER.
Press DISPLAY to exit.
Figure 8. Main Menu
<DISPLAY> |
|
)DISPLAY MODE | 1 |
TIME DATE SIZE | SMALL |
Ex.<MODE 1>
01 - 01 - 97 00:00:00
Figure 9. Display Menu
6.3MAIN MENU
•DISPLAY
Sets the display format of the time and date on the monitor.
•TIME DATE SEARCH
Sets the time/date and direction to search for a desired location on a tape.
•TIMER PROGRAM
Sets the timed recordings.
•RECORDING SET UP
Sets the alarm recording mode, alarm recording duration, and emergency recording.
•REAR TERMINAL
Sets the number of frames or fields to record for CLK OUT, output signal of the CALL OUT terminal, and the MODE OUT terminal, etc.
•MAINTENANCE
Displays the power loss list and alarm list, etc. Initializes all menu settings. Clears the power loss list and alarm list.
•FIRST TIME SET UP
Sets the quasi
6.4DISPLAY MENU 6.4.1 Display Mode
This is where you set the display mode. (Set the current date and time in the First Time Set Up menu. Refer to Sections 6.10.1 and 6.10.2.)
DISPLAY MODE 1 Displays date and time.
DISPLAY MODE 2 Displays date, day of the week, present time, and recording mode.
DISPLAY MODE 3 Displays nothing until an alarm recording
DISPLAY MODE 4 Displays nothing. Even in the case of alarm recording nothing is displayed on the monitor.
During an alarm recording, the alarm recording number is displayed if the display mode is set from 1 to 3.
6.4.2 Time Date Size
This is where you set the size of the letters in the day and time display.
SMALL | The letters become small. |
LARGE | The letters become large. |
Pelco Manual C651M (7/99) | 21 |