SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from
BLift TV set up to detach from
Components not identified by a part number or | The component parts of an assembly are indicated by the | * Items marked with an asterisk are not stocked since | ||||
description are not stocked because they are seldom | reference numbers in the far right column of the parts list | they are seldom required for routine service. Expect | ||||
required for routine service. | and within the dotted lines of the diagram. | some delay when ordering these components. | ||||
|
|
|
|
|
|
|
| NOTE: The components identified by shading |
| NOTE: The components identified by a red outline and a mark contain |
| ||
| and ! mark are critical for safety. Replace only |
| confidential information. Specific instructions must be adhered to whenever |
| ||
| with part number specified. |
|
| these components are repaired and/or replaced. |
| |
|
|
|
| See Appendix A: Encryption Key Components in the back of this manual. |
| |
|
|
|
|
|
|
|
A |
B |
6 |
4 |
7
5 |
1
2 |
3 |
REF. NO. | PART NO. | DESCRIPTION | [ASSEMBLY INCLUDES] | REF. NO. | PART NO. | DESCRIPTION | [ASSEMBLY INCLUDES] |
C Gently place the TV set face down onto a soft cloth
C |
Soft Cloth
1 | BASE (M3B) ASSEMBLY | |
|
|
1
1
2
|
| |
3 | BASE, STAND (ML3B) | |
|
| |
4 | COVER, NECK (M3B) | |
|
| |
4 | COVER, NECK (ML3B) | |
|
|
| 5 | NECK (M3B) | |
|
|
| |
* | 5 | NECK (ML3B) | |
|
|
|
6
(SCREWS TO ATTACH NECK TO BASE ASSEMBLY)
7
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
11 |