Sony AZ1-L SUPPORT, Panel, BAL BOARD, Complete, LCD Panel, BRACKET, Side Jack, Switch Unit

DISASSEMBLY/PART NUMBER INFORMATION

1-4. G2LE/G2HE/GD2 (POWER) BOARD, BAL BOARD, LCD PANEL, AND HLR BOARD REMOVAL

A	Slide Side Jack Bracket to right-side of BAL Board to detach from position
B	Remove 4 screws from BAL Board

NOTE: The components identified by shading	NOTE: The components identified by a red outline and a mark contain
and ! mark are critical for safety. Replace only	confidential information. Specific instructions must be adhered to whenever
with part number specified.	these components are repaired and/or replaced.
	See Appendix A: Encryption Key Components in the back of this manual.

C Disconnect 5 connectors from BAL Board
D Remove 1 PWB Holder to detach BAL Board from LCD Panel
E	Remove 2 screws from Bottom Frame to detach from Bezel Assembly
	(KDL-40EX405/40EX406/46EX405 ONLY)
F	Remove 2 screws from Bottom Frame to detach from LCD Panel

GRemove 4 screws from G2LE/G2HE/GD2 (Power) Board

HDisconnect 4 connectors from G2LE/G2HE (Power) Board

Disconnect 6 connectors from GD2 (Power) Board

I Lift up Switch Unit and disconnect 1 connector to remove from Bezel

J	Press down on Panel Support
	and slide-out to remove from
	Bezel Assembly	J
K	Carefully Lift up Panel to
	remove from Bezel Assembly

158

151

152

153

L Disconnect 1 connector from

HLR Board and release clips,

then lift up to detach from

position

NOTE: The Mini Card Spacers

and PWB Holder are not

I

156

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

155

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

included with the Boards

and must be replaced when

replacing the Boards.

Mini Card

Spacer

151	NA	SUPPORT, PANEL
	FOR ALL SUPPORT PANEL PART NUMBER INFORMATION
	REFER TO THE LCD PANELS SERVICE MANUAL
152	X-2547-553-1	BEZEL ASSEMBLY (CY32 LS)
		(KDL-32EX305 ONLY)

156A-1761-435-A BAL BOARD, COMPLETE (KDL-32EX305/32EX306 ONLY)

156	A-1761-434-A	BAL BOARD, COMPLETE
		(KDL-32EX405/40EX405/-40EX406/46EX405 ONLY)

NOTE: For BAL Board replacement, please refer to section

H

G

F

E

D

C

B

K

L

A

152	X-2547-647-1	BEZEL ASSEMBLY (CY32D GM)
		(KDL-32EX306 ONLY)
152	X-2547-547-1	BEZEL ASSEMBLY (CY32 DS)
		(KDL-32EX405 ONLY)

152X-2547-548-1 BEZEL ASSEMBLY (CY40 DS) (KDL-40EX405 ONLY)

152X-2547-648-1 BEZEL ASSEMBLY (CY40D GM) (KDL-40EX406 ONLY)

152X-2547-555-2 BEZEL ASSEMBLY (CY46 DS) (KDL-46EX405 ONLY)

153A-1753-637-A HLR BOARD, MOUNTED

154	NA	LCD PANEL
	FOR ALL LCD PANEL PART NUMBER INFORMATION
	REFER TO THE LCD PANELS SERVICE MANUAL
155	4-175-711-01	BRACKET, SIDE JACK

2-2. Adjustments After Replacing the BAL Board or LCD Panel

NOTE: Final software is not installed on this BAL Board. Install the update after replacing this board using the instructions provided with the software.

1571-474-200-11 G2LE (POWER) BOARD, COMPLETE (KDL-32EX305/32EX306/32EX405 ONLY)

157	1-474-202-21	G2HE (POWER) BOARD, COMPLETE
		(KDL-40EX405/40EX406 ONLY)

1571-474-205-11 GD2 (POWER) BOARD, COMPLETE (KDL-46EX405 ONLY)

158	1-487-725-11	SWITCH UNIT
	2-580-640-01	SCREW, +BVTP 4X16 TYPE2 IT-3
	2-580-592-01	SCREW, +PSW M3X8
	4-159-298-01	SCREW, +PSW M4X10

KDL-32EX305/32EX306/32EX405/40EX405/40EX406/46EX405 14