Sony AZ1-L service manual Selecting the Model, Display the Digital Service Menu

SERVICE ADJUSTMENTS

2-2-2. SELECTING THE MODEL

After replacing the BAL Board or LCD Panel, go into Service Mode to set the Model data value.

1.TV must be in standby mode. (Power off).

2.Access Service Mode.

Press the following buttons on the Remote Commander within a second of each other:

DISPLAY Channel 5 Volume + POWER

3.Display the DIGITAL Service Menu.

NOTE: There are 3 Service Menus for this model, DIGITAL, CHASSIS, and SUB. If the DIGITAL Service Menu is

not displayed, press JUMP or OPTIONS on the Remote Commander.

DIGITAL	SERVICE
001 OP
000 VERS	---
<MAIN>	<SUB>
DM1.301J00AA	SM1.010W00AA
M2.105C	SB1.000W00AA
DD1.016J00AA	SD1.010W00AA
(DM1301J00AA).	RF01.05
WP00.521J00AA	ID1C117081
ID1C117081	LTY320AB01
PID04020000
WF:2.0.0.99	<BEM>
WF:0B	BM1.012W00LU
Camera FW	BB1.000W00LU
Camera FW	BD1.011J46LUX
	---.---------

4. Press 2 to move to the 002 MODEL (Next) category.

DIGITAL	SERVICE
002 MODEL
000 SEG	01: 2a-3

5. Using the table, press 3 to increase the data value or

6to decrease the data value, to match the model of the TV.

Chassis	Model Name	䎧䏄䏗䏄䎃䎹䏄䏏䏘䏈	䎦䏒䏇䏈䎃䎱䏄䏐䏈
AZ1-L	KDL-32EX305	14	3a-2
AZ1-L	KDL-32EX306	14	3a-2
AZ1-L	KDL-32EX405	14	3a-2
AZ1-L	KDL-40EX405	14	3a-2
AZ1-L	KDL-40EX406	14	3a-2
AZ1-L	KDL-46EX405	14	3a-2

DIGITAL			SERVICE
002 MODEL				Code Name
000 SEG	14:	3a-2

Data Value

6. Proceed to “Selecting the Destination”.

KDL-32EX305/32EX306/32EX405/40EX405/40EX406/46EX405 21