DISASSEMBLY/PART NUMBER INFORMATION
1-2. REAR COVER AND VESA BRACKET REMOVAL
ARemove screws from Rear Cover
10 from
8 from
11 from
BRemove 2 screws from Rear Cover
CRemove 2 screws from Rear Cover
DRemove 1 screw from Terminal position
ERemove 1 screw from Side Jack position
FLift up Rear Cover from bottom to remove from Bezel Assembly
GDisconnect Power Cord from Power (G2LE/G2HE) Board and detach from Under Cover
(ALL EXCEPT KDL-46EX405)
Disconnect Power Cord from AC Inlet and detach from Under Cover
HRemove 1 screw from Under Cover to detach from Bottom Frame
I Slide out Vesa Brackets to remove from Rear Cover
NOTE: The Vesa Brackets are not included with the Rear Cover and must be reattached to the replacement Rear Cover
NOTE: The components identified by shading |
| NOTE: The components identified by a red outline and a mark contain |
and ! mark are critical for safety. Replace only |
| confidential information. Specific instructions must be adhered to whenever |
with part number specified. |
| these components are repaired and/or replaced. |
|
| See Appendix A: Encryption Key Components in the back of this manual. |
|
|
|
54 |
53 |
52 |
A |
I |
51 |
REF. NO. | PART NO. | DESCRIPTION | [ASSEMBLY INCLUDES] | REF. NO. | PART NO. | DESCRIPTION | [ASSEMBLY INCLUDES] |
B
H |
51 | REAR COVER (32) | |
|
|
54 | BRACKET, VESA (S) | |
|
| (ALL EXCEPT |
C |
| |
D | |
| |
E | |
|
G |
F |
51 | REAR COVER (40) | |
|
| |
51 | REAR COVER (46) | |
|
| |
52 | COVER, ECS | |
53 | COVER, UNDER (32) | |
|
| |
53 | COVER, UNDER (37) | |
|
|
53
54
12 |