Optional Setting, Channel Add/Delete | Sylvania LC200SL8A guide

OPTIONAL SETTING

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL SETUP”, then

press [ENTER].

e.g.) digital TV mode

	- TV SETUP	-
or	PICTURE
or	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	BACK LIGHT	[BRIGHT]
	COLOR TEMP.	[NORMAL]
	DTVCC

3 Use [Cursor K/L] to select “ADD/DELETE(DTV)” or “ADD/DELETE”, then press [ENTER].

	e.g.) digital TV mode

		- CHANNEL SETUP -
or		ADD/DELETE(DTV)
or		AUTO PRESET CH(DTV)
		AUTO PRESET CH(TV/DTV)
		AUTO PRESET CH(CATV)
		! CATV takes approx. 50min.

6 Press [SETUP] to exit.

Note:

•”ADD/DELETE(DTV)” or “ADD/DELETE” menu will disappear automatically in about 10 seconds.

•In the digital mode (DTV), you can add or delete channels only for major channel.

•Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 13.)

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING

4 Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 15.)

e.g.) digital TV mode D25

ADD/DELETE : DTV

5 Use [Cursor s/ B] to select “ADD” or “DELETE”.

•To add or delete another channels, repeat steps 4-5.

•Color of channel number displayed at the right top of the TV screen indicates;

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

TROUBLESHOOTING INFORMATION