15.MODE Button [pages
Activates program playback or random playback mode when playing CDs or MP3.
16.Number Button
TV Mode: [page 14]
Press two digits to directly access the desired channel.
Remember to press a "0" before a single digit channel.
+100 Button–
Press to select cable channels which are equal or greater than number 100.
DVD Mode: [page 21]
Press to enter the desired number.
+10 Button–
Press to enter the desired numbers which are equal or greater than number 10.
17.SLEEP Button [page 17]
Press SLEEP to display the sleep timer and start the function. The shut off time can be determined by the number of times you press this button. (0, 30, 60, 90, or 120 minutes)
18.REV h Button [page 20]
Press to view the DVD picture in fast reverse motion. Press PAUSE, then press this button to begin slow motion playback. Press this button repeatedly to change the reverse speed of slow motion.
FWD g Button [page 20]
Press to fast forward the Disc. Press PAUSE, then press this button to begin slow motion playback. Press this button repeatedly to change the forward speed of slow motion.
19.ZOOM Button [page 20]
Expands the picture to fill the entire screen.
20.SETUP Button [pages 14,
Press to enter or exit the TV menu or DVD setup mode.
21.TITLE Button [page 19]
Displays the title menu.
22.CLEAR Button [pages
Resets a setting.
23.DISPLAY Button TV Mode:
Press to display the channel number on the screen. If you press it again, the channel number will disappear.
DVD Mode: [page 25]
Displays the current status on the TV screen for checking purposes.
24.SEARCH MODE Button [page 21]
Press to locate a desired point.
25.AUDIO Button [page 24]
Press to select a desired audio language or sound mode.
26.SUBTITLE Button [page 24]
Press to select a desired subtitle language.
27.REPEAT Button [page 22]
Repeats playback of the current disc, title, chapter or track.
sequence being played back from a different angle.
29.REPEAT
Repeats playback of a selected section.
30.RETURN Button [page 24]
Returns to the previous operation.
31.ENTER Button [pages 14, 19]
Press to accept a setting.
32.Arrow Buttons
TV Mode: [page 14]
Press to select a setting mode from the menu on the TV screen.
Press to select or adjust from a particular menu.
DVD Mode: [page 19]
Use when making settings while watching the display on a TV screen.
33.DISC MENU Button [page 19]
Displays the menus in the DVD.
34.SELECT Button [pages 11, 19]
Press to change to TV mode, external input mode or DVD mode.
NOTE: When you select the DVD mode by this button, press PLAY or OPEN/CLOSE first. Otherwise, the DVD features do not function.
35.MUTE Button
Press MUTE to turn off the sound
portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press MUTE again or press VOL. m or nto restore sound.
36.PICTURE Button [page 16]
Press to enter picture adjustment mode.
37.Power cord
Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to a standard AC outlet.
38.AUDIO L/R analog output Jack
Connect to the analog audio input of an external amplifier or stereo system.
39.COAXIAL digital audio out Jack (DVD Audio Only)
Connect to the digital input of an external amplifier or decoder.
40.ANT. in Jack
Connect to an antenna, cable system, or satellite system.
41.DC 13.2V Jack
Connect to the Car Battery Cord.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity
3)Replace the cover.
28.ANGLE Button [page 24]
Press to change the camera angle to see the
NOTES
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.EN
– 9 –
0C28