Sylvania DVR90DG owner manual Timer Recording cont’d, Hints for Timer Recording

Page 32

Recording

Timer Recording (cont’d)

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

•If a disc is not on the tray, the indicator flashes and Timer Recording cannot be performed. In some cases, the indicator appears momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

•When all the Timer Recording is completed, the indicator flashes. To play or eject the recorded disc, press [POWER] first, and then press [PLAY B] or [OPEN/CLOSE A].

•During the Timer Recording or timer standby ( indicator is on the front panel display), any operations on the unit will not be available. To make these operations available, cancel the Timer Recording or timer standby first ( indicator disappears).

•To cancel the timer standby mode, press [POWER].

•When the Start and the End time are the same, the length of the recording will be set for 24 hours. When the disc reaches at the end during the recording, the unit turns itself off.

•When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off.

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority.

A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary.

A programming set previously has priority

When the starting time is same:

A program set previously (PROG. A) has priority.

PROG. A

 

 

PROG. B

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

When some programming have been made at the end time of the programming currently being recorded:

A program set previously (PROG. B) has priority.

PROG. A

 

 

PROG. B

 

 

PROG. C

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

When the recording time is partially overlapped:

PROG. A will start after PROG. B is complete to be recorded.

PROG. A

PROG. B

 

 

 

 

 

Actual

 

 

 

 

 

 

PROG.B

PROG.A

recording

 

The first 30 seconds (at the longest) will be cut off.

When the recording time is entirely overlapped:

PROG.A will not be recorded.

PROG. A

 

PROG. B

 

Actual

PROG. B

recording

 

Note for DVD recording

•When the recording time of two programs are overlapped, or the End time of a program and the Start time of another

is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to one minute or more, this program will be displayed with error number E40 in the timer programming list.

When the End time of the programming currently being recorded and the Start time of the subsequent program are same:

If PROG. A is a DVD recording program, the beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Setup menu Changing Others Before you start Connections Getting startedRecording Playing discs Editing EspañolPrecautions Laser SafetyBefore you start Make your contribution to the environmentPrecautions cont’d Before youInstallation Location Supplied AccessoryAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningDolby Digital Recording MaintenanceChanging the Editing Setup menu Others Español Table of contents Features SymbolDescription Menu Others EspañolRear Panel Functional overviewFront Panel Remote Control Functional overview cont’dYou start Connections Getting started Recording ReturnInstalling batteries in the remote control Using a remote controlDisplay menu Guide to Displays the On Screen menuSetup menus Front Panel Display Guide Connections Connection to a TVThis unit Audio OUTConnection to a cable box or satellite box You cannot record one channel while watching another channelChanging the Recording Playing discs Editing Setup menu Connection to an Audio SystemDigital Others EspañolGetting started Easy DVD recordingEasy DVD recording Cont’d Select Record Recording Desired On DVD Speed Channel DiscInitial setting Channel settingChannel setting cont’d Adding/deleting channelsUsing K / L, select TV Audio Select. Press Enter Using K / L, select Stereo or SAP. Press EnterSelecting the TV stereo or SAP SAP Secondary Audio ProgramEnter Setting the clockAuto Clock Setting Setting the clock cont’d Manual Clock SettingUsing K / L, enter the date month / day / year Press Enter againSetting the Daylight Selecting the TV aspect ratioSaving Time YouRecording Information on DVD recordingInformation Recordable discInformation on DVD recording cont’d Restrictions on recordingMaking discs playable in other DVD player Finalize Information on copy controlFormatting a disc Choosing the recording format of a blank discReformatting a disc Setting for Auto ChapterFormatting a disc cont’d Basic recording Follow the steps below to record TV programsTurn on the unit. Load a record- able disc Make sure that the TV input is set on the unitStop C One-touch Timer RecordingTurn on the unit and load a recordable disc Timer Recording Press Timer ProgUsing K / L, enter the Start and End. Press B Using K / L, select the channel number to record. Press BClear Priority of overlapped settings Timer Recording cont’dHints for Timer Recording Settings for an external source Changing the Editing Setup menuConnection to an external source VCR camcorder etcRecording from an external source Settings for an external source cont’dSetting a disc to protect Finalizing the discs Press Setup Using K / L, select Recording. Press Enter Using K / L, select ON. Press EnterFinalizing the discs cont’d Auto finalizeGuide to displays Playing discsInformation on DVD play Menu / List Basic playbackPlayback Setup menu Changing Basic playback cont’dPlaying MP3 disc StartedPress Play B to resume play Playing discs using the Disc menuPlaying discs using the Title menu Special playback Resume playSkipping TV commercials during play X40Special playback cont’d Rapid PlayStep by step playback Slow forward / Slow reverse playStart Connections Getting started Recording Marker SetupZoom Using Skip H / G Using DisplaySearch Title/Chapter searchSearch cont’d Track searchTime search During CD playback you canRandom playback Repeat/Random/Program playbackRepeat play Switching subtitles Repeat/Random/Program playback cont’dSelecting the format of audio and video Program playSelecting the format of audio and video cont’d Switching audio soundtrackSwitching virtual surround system Display Switching camera anglesReducing block noise Editing Information on disc editingEditing discs in Video mode Using K / L / / B, select the desired title. Press EnterUsing K / L, select Edit. Press Enter Deleting titlesTOP MENU, Return Editing discs in Video mode cont’dPutting names on titles After this operation is complet Ed, press Return and then Setting or clearing chapter markersMarker will be added or deleting Original menu will appear Editing discs in VR mode OriginalOriginal list will appear Editing discs in VR mode Original cont’d Setting titles to protectRefer to Setting a disc to protect Confirm the indication OFF ON. Press EnterUsing K / L, select Protect. Press Enter Releasing titles from protectingConfirm the indication On OFF. Press Enter Key icon will disappear from the title in the Original listEditing discs in VR mode Playlist Using K / L, select Title Delete. Press EnterUsing K /L, select Edit. Press Enter Using K /L, select Yes. Press EnterEditing discs in VR mode Playlist cont’d Dividing a titleUsing s / B, select Yes Using K / L, select Title Combining. Press EnterCombining titles You startAdding titles to a Playlist Deleting a PlaylistEditing discs in VR mode Original / Playlist Using K / L, select Delete. Press EnterDeleting parts of titles Press Enter again to start the previewEditing discs in VR mode Original / Playlist cont’d Option window will appear. Playlist Confirm window will appear. Playlist AddPlaylist Delete You cannot delete the firstSetting pictures for thumbnails Picture for thumbnail will be set. PlaylistSetup Items highlight is the default Contents Changing the Setup menuTour of the Setup menu Using K / L, select Language. Press Enter Language settingPress Setup Using K / L, select Playback. Press Enter Instructions continue on the next Language setting cont’dDisplay setting Display setting cont’d Audio settingAudio setting cont’d Using K / L, select Audio. Press Enter Digital OutWhen playing disc with copyright protection When playing a DVD- RW disc recorded in VR modeSettings for Parental lock level Dynamic Range Control Default onUsing K / L, select a setting. Press Enter Using K / L, select Parental Lock. Press EnterSettings for Parental lock level cont’d YesTroubleshooting SymptomOthers RemedyRecording/Timer Recording/Editing Or has priorityTroubleshooting cont’d Error message Cause SolutionOthers You press OPEN/CLOSE aLanguage code Recording area has enough spaceFrequently Asked Questions GlossarySpecifications GeneralTuner Input / OutputEspañol Fácil grabación de DVDSugerencia 1 Reproduzca el contenido grabado Sugerencia 2 Edite el disco grabadoCustomer Service TelLimits and Exclusions Funai CorporationDisc type Functions AttributesAfter all recordings, finalize your disc
Top Page Image Contents