Sylvania DVR90DG owner manual Settings for an external source cont’d, Setting a disc to protect

Recording

Settings for an external source (cont’d)

Recording from an external source

VideoVR

DVD-RW DVD-RW DVD-R

Before recording from an external source, see the instructions for the connection on page 33.

1.Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected.

Refer to the table on page 15.		.@/:	ABC	DEF
	4	1	2	3
2. Press [OPEN/CLOSE A] to open the disc tray. Place the disc to		GHI	JKL	MNO	CH
		4	5	6
record properly.		PQRS	TUV	WXYZ	REPEAT
3. Press [OPEN/CLOSE A] to close the disc tray.		7	8	9
		DISPLAY	SPACE	CLEAR	SETUP
			0

This operation may take a while to be recognized.

4.Select the input of the unit which the external equipment is connected. (L2 or L1)

•To use the input jacks on the back of this unit, select “L1” position by pressing [0], [0], [1] on the remote control or the [CHANNEL L / K] .

•To use the input jacks on the front of this unit, select “L2” position by pressing [0], [0], [2] on the remote control or the [CHANNEL L / K] .

TOP MENU MENU/LIST RETURN ENTER

2 3 4 8

5. Select a recording speed pressing [REC SPEED].

Refer to “Recording speed” on page 24.	XP	SP	LP
6. Press [REC/OTR] on the unit to start
	(1H)	(2H)	(4H)
recording.
7. Press “Play” on the external source to			EP
	SEP	SLP
record from.	(10H)	(8H)	(6H)

8.Press [STOP C] on the unit to stop recording. This operation may take a while to be completed.

OPEN/CLOSE	CHANNEL	REV	FWD	STOP	PLAY	POWER
REC SPEED REC/OTR
			S-VIDEO	VIDEO	L	AUDIO R

5 6

VR

DVD-RW

To prevent accidental recording, editing or erasing the titles, you can protect them from the Setting menu.

1

Press [SETUP].

2

Using [K / L], select “Disc”. Press [ENTER].

Disc menu will appear.

3

Using [K / L], select “Disc Protect OFF ON”. Press [ENTER].

Setting a disc to protect

Confirm window will appear.

Disc Protect OFFON

Yes

No

4

Using [K / L], select “Yes”.

Press [ENTER].

A disc will be protected.

	DISPLAY	SPACE	CLEAR	SETUP	1
2		0
	TOP MENU MENU/LIST		RETURN	ENTER
3	{	K		B
4		L
	REC SPEED	REV	PLAY	FWD

Note

•The Disc Protect setting is available only when a disc with VR mode is inserted.

•You can select only the Disc Protect menu when a protected disc is inserted.

To cancel the disc protect:

•When you insert a disc protected with this unit, “Disc Protect ON → OFF” will appear instead of “OFF → ON”.

Disc Protect ONOFF

Yes

No

To release the protect for the disc, select “Disc Protect ON → OFF” at step 3, then select “Yes”.

34