Sylvania DVR90DG owner manual Recording/Timer Recording/Editing, Or has priority

	Others
	Troubleshooting (cont’d)
Symptom	Remedy
Playback
The disc does not play.	• No disc is inserted.

•A blank disc is inserted.

•The disc is upside down. Insert the disc with the labeled side facing up.

•The disc is not correctly inserted.

•The unit cannot play certain discs (such as a CD-ROM) (page 37).

•The region code on the DVD-Video does not match the unit (page 37).

•Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates (page 4).

•If the disc was recorded on another recorder, the unit cannot play the disc if it was not finalized (page 35).

Playback image freezes for a	• During the playback of two layered disc, picture may freeze for a
second.	moment when the 1st layer switches to the 2nd layer. This is not a
	malfunction.
The disc does not start playback	• Resume play was activated (page 41). Press [STOP C] twice.
from the beginning.	• You have inserted a disc whose Title menu or DVD menu
	automatically appears on the TV screen when it is first insert.
The unit starts playing from the disc	• The DVD-Video features an auto playback function.
automatically.
Some functions such as Stop,	• Depending on the disc, you may not be able to do some of the
Search, or Slow-motion Play cannot	operations above. See the instruction manual supplied with the
be performed.	disc.
The language for the sound track	• Multilingual tracks are not recorded on the DVD-Video, DVD-R or
cannot be changed.	DVD-RW being played.
	• The DVD-Video prohibits the changing of the language for the
	sound track.
	• Try changing the language using the DVD-Video’s menu.
The subtitle language cannot be	• Multilingual subtitle are not recorded on the DVD-Video.
changed or turned off.	• The DVD-Video prohibits changing of the subtitles.
	• Try changing the subtitle using the DVD-Video’s menu.
The angles cannot be changed.	• Multi-angles are not recorded on the DVD-Video being played.
	• The angle-change operation is whenever possible as long as
	the disc contains a multi-angle portion. Actual change will be
	performed when the portion has come up.
	• The DVD-Video prohibits changing angles.
	• Try changing the angle using the DVD-Video’s menu.
Recording/Timer Recording/Editing
The channel cannot be changed from	• Set the TV’s input to “TV”.
the channel you are recording.
Recording does not start immediately	• An unused DVD-R or DVD-RW has been inserted. It takes a while
after you press [REC/OTR].	for the unit to automatically format a DVD-RW.
Nothing was recorded even though	• There was a power failure during recording.
you set the timer setting correctly.	• The unit’s internal clock stopped due to a power failure that lasted
	for more than 30 seconds. Reset the clock (pages 21- 22).
	• Disconnect the AC power cord from the AC outlet, and connect it
	again.
	• The program contains copy protection signals that restricts
	copying.
	• The timer setting overlapped with another setting that was set later
	or has priority.
Recording does not stop immediately	• It will take a few seconds for the unit to input disc data before
after you press [STOP C].	recording can stop.
Timer Recording is not complete or	• The timer setting overlapped with another setting that was set
did not start from the beginning.	previously has priority (page 32).
	• Disc space was not enough.

Changing the Before you start Connections Getting started Recording Playing discs Editing Setup menu Others

Español

73