Sylvania LD370SS8 owner manual Initial Setting, 5Auto Channel Scan, 5Language Selection, Dvd

INITIAL SETTING

And select the sound input for the HDMI jack if your TV is connected to a HDMI device.

(Refer to “HDMI Audio” on page 27.)

•LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu.

(Refer to “Language Selection” on page 14.)

•DVD

You can customize some functions for the disc playback. Make sure the player is in stop mode. (Refer to “SETTING DVD“ section on page 39.)

•When aerial antenna is connected, select “Air”.

•When connected to CATV, select “Cable”.

•Scanning and memorizing of channels start automatically.

Now the system is scanning for channels, please wait.

72%

Analog channels		10ch
Digital channels		6ch
SETUP	Exit

•When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cable.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL” , then press [ENTER].

3Use [Cursor K/L] to select “Autoscan”, then press [ENTER].

Channell

Autoscan

Channel List

Manual Register

Antenna

Note:

•If you connect the cable system directly, contact the CATV installer.

•If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.

•Channel settings will be saved even if the power fails.

•If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use [Cursor K/L] to select “IDIOMA” or “LANGAGE”, then press [ENTER]. Use [Cursor K/L] to select “English”, then press

[ENTER]. Press [SETUP] to exit the main menu.

•With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost.

5Language Selection

You can choose English, Spanish, or French as your on-screen language.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “LANGUAGE”, then press [ENTER].

Use [Cursor K/L] to select an appropriate option, then press [ENTER].

3Use [Cursor K/L] to select “English”, “Español” or “Français”, then press [ENTER].

Autoscan		Language
Autoscan will rescan all channels.	Back	Select the language for setup display.	English
This may take a while to complete.	Air
Select the destination of "ANT.IN" jack.	Cable	Elija el idioma de ajuste.	Español
Air	Cable	Sélectionner langue écran config.	Français
	1hour

Cable	Or
	ANT.IN

4 Press [SETUP] to exit.

14

EN