Sylvania LC370SS8 Entered channel number, Changes automatically, Control, Unit, Screen dialogue

Page 36

TROUBLESHOOTING

Symptom

Remedy

The entered channel number	• Many digital channels have alternate channel numbers. The unit changes the
changes automatically	numbers automatically to the ones signifying the broadcasting stations. These are
	the numbers used for analog broadcasts.
Remote control does not work	• Check the antenna or cable connection to the main unit.
	• Check the batteries of the remote control.
	• Check if there is an obstacle between the infrared sensor window and the remote
	control.
	• Test the signal output. If OK, then possible infrared sensor trouble.
	(Refer to “IR Signal Check” on page 37.)
	• Aim the remote control directly at the infrared sensor window on the front of the
	unit.
	• Reduce the distance to the unit.
	• Re-insert the batteries with their polarities (+/– signs) as indicated.
	Problems with Closed Caption Feature

Misspelled captions are	• Closed captioning production companies may broadcast programs without
displayed.	correcting the misspelling in a live broadcast.
Captions are not entirely	• Captions that are delayed a few seconds behind the actual dialogue are common
displayed, or captions are	for live broadcasts. Most captioning production companies can display a dialogue
delayed behind the dialogue.	to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective
	editing is used to insure that the captions remain up-to-date with the current TV
	screen dialogue.
Captions are displayed as a	• Interference from buildings or weather conditions may cause captioning to be
white box.	incomplete.
No caption is displayed in the	• Broadcasting station may shorten the program to insert advertisement. The closed
closed caption-supported	caption decoder cannot read the information of the shortened program.
program.
No caption is displayed	• The videotape may be illegally copied, or the caption signal might not have been
when playing the videotape	read during copying.
containing captions.
Black box is displayed in the	• “Text” mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4”or “Off”.
TV screen.

Note:

•The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

36

EN

Image 36

Contents To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna LC370SS8Introduction Important note is located on the rear of the cabinetPrecautions RADIO-TV Interference5Supplied Accessories 5Symbols Used in this ManualQuick start guide Remote control LocationFeatures ContentsDTV/TV/CATV 5Remote Control Function 5Installing the Batteries5Control Panel Connection 5Basic ConnectionAntenna Cable Connection Connection to Cable Box or Satellite Box5External Device Connection Hdmi ConnectionHDMI-DVI Connection Component Video Cable Connection Video Cable ConnectionVideo Connection Audio Output Connection DigitalAnalog PC Connection Initial Setting 5Initial SetupMake sure if the unit is connected to antenna or cable Scanning and memorizing of channels start automatically5Main Menu 5Auto Channel Scan5Language Selection Enter5Volume Adjustment What is the minor channel?Watching TV 5Channel Selection5Still Mode 5Switching Each ModeYou can freeze the image shown on the TV screen 5Switching Audio Mode This section describes how to switch the audio languageStereo SAP5Screen Information Press InfoBroadcasting Information Day of Memories5TV Screen Display Mode 5Sleep Timer Press Sleep to set the sleep timerTo Cancel the Sleep Timer Optional Setting 5Channel ListChannel l List 5Manual Register 5Antenna ConfirmationUse the Number buttons or CH K/L to select Channel you want to add, then press Enter5Picture Adjustment 5Sound Adjustment You can adjust treble, bass and surroundAdjust the sound setting Treble, BassClosed Caption 5DTV Closed Caption DTV CCUse Cursor K/L to select DTV CC, then press Enter Detailil5CC Style Font StyleFont Size Font Color Font OpacityBack Color Back OpacityChipip Enter password ChipChip ip Association of America Use Cursor K/L to select TV Rating, then pressTo Set the Sub Ratings ChipipUse Cursor K/L to select New Password, then press Enter Chipip Enter password Confirm password 5PC Settings Clock, Phase Horizontal Position, Vertical Position 5HDMI Audio You can set the method of sound input for the Hdmi 1-IN jackTroubleshooting 5Troubleshooting GuideCheck the batteries of the remote control Refer to IR Signal Check onDelayed behind the dialogue Entered channel numberMaintenance InformationGlossary Atsc5General Specifications 5Electrical Specification5Other Specifications 5Cable Channel DesignationsMemo Limited Warranty

Related manuals

Manual 1 pages 35.39 Kb