Sylvania LC370SS8 owner manual Information, Glossary, Maintenance, Atsc, Ntsc

Page 37

INFORMATION

5Glossary

ATSC

Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).

Component Video

This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio.

HDMI (high-definition multimedia interface)

Interface that supports all uncompressed, digital audio/video formats including set-top box, DVD player or digital television, over a single cable.

HDTV (high definition TV)

Ultimate digital format that produces high resolution and high picture quality.

NTSC

Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards.

Password

A stored 4-digit number that allows access to parental control features.

SAP (secondary audio program)

Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.

SDTV (standard definition TV)

Standard digital format that is similar to the NTSC picture quality.

S-video

Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through separate cables.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV

5Maintenance

Cabinet Cleaning

•Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

 

OPTIONAL

IR Signal Check

SETTING

 

If the remote control is not working properly, you can use an AM

 

radio or digital camera (including a cellular phone with built-in

 

camera) to see if it is sending out an infrared signal.

TROUBLESHOOTING

• With an AM radio:

Tune the AM radio station to a non-

 

broadcasting frequency. Point the remote

 

control towards it, push any button and

 

listen. If the sound from the radio flutters,

 

it is receiving the remote control’s infrared

 

signal.

 

• With a digital camera

INFORMATION

(including built-in cell phone cameras):

 

Point a digital camera towards the remote control.

 

Push any button on the remote control and look

 

through the digital camera. If the infrared light

 

appears through the camera, the remote control is

 

working.

 

37

EN

Page 36 Page 38
Image 37
Page 36 Page 38
Contents LC370SS8 To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect AntennaImportant note is located on the rear of the cabinet IntroductionRADIO-TV Interference Precautions5Symbols Used in this Manual 5Supplied AccessoriesQuick start guide Remote control LocationContents FeaturesDTV/TV/CATV 5Installing the Batteries 5Remote Control Function5Control Panel 5Basic Connection ConnectionAntenna Cable Connection Connection to Cable Box or Satellite BoxHdmi Connection 5External Device ConnectionHDMI-DVI Connection Video Cable Connection Component Video Cable ConnectionAudio Output Connection Digital Video ConnectionAnalog PC Connection 5Initial Setup Initial SettingMake sure if the unit is connected to antenna or cable Scanning and memorizing of channels start automatically5Auto Channel Scan 5Main MenuEnter 5Language SelectionWhat is the minor channel? 5Volume AdjustmentWatching TV 5Channel Selection5Switching Each Mode 5Still ModeYou can freeze the image shown on the TV screen This section describes how to switch the audio language 5Switching Audio ModeStereo SAPPress Info 5Screen InformationBroadcasting Information Day of Memories5TV Screen Display Mode Press Sleep to set the sleep timer 5Sleep TimerTo Cancel the Sleep Timer 5Channel List Optional SettingChannel l List 5Antenna Confirmation 5Manual RegisterUse the Number buttons or CH K/L to select Channel you want to add, then press Enter5Picture Adjustment You can adjust treble, bass and surround 5Sound AdjustmentAdjust the sound setting Treble, BassClosed Caption DTV CC 5DTV Closed CaptionUse Cursor K/L to select DTV CC, then press Enter DetaililFont Style 5CC StyleFont Size Font Opacity Font ColorBack Color Back OpacityChip Chipip Enter passwordChip ip Use Cursor K/L to select TV Rating, then press Association of AmericaTo Set the Sub Ratings ChipipChipip Enter password Confirm password Use Cursor K/L to select New Password, then press EnterClock, Phase 5PC SettingsHorizontal Position, Vertical Position You can set the method of sound input for the Hdmi 1-IN jack 5HDMI Audio5Troubleshooting Guide TroubleshootingRefer to IR Signal Check on Check the batteries of the remote controlDelayed behind the dialogue Entered channel numberInformation MaintenanceGlossary Atsc5Electrical Specification 5General Specifications5Other Specifications 5Cable Channel DesignationsMemo Limited Warranty
Related manuals
Manual 1 pages 35.39 Kb
Top Page Image Contents