Sylvania LC370SS8 5DTV Closed Caption, Dtv Cc, Use Cursor K/L to select DTV CC, then press Enter

Page 27

5DTV Closed Caption

DTV

In addition to the basic closed caption described on page 26, DTV has its own closed caption called DTV CC. Use this menu to change the settings for

DTV CC.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

3Use [Cursor K/L] to select “Closed Caption”, then press [ENTER].

Detailil

Closed Caption

V–chip

PC Settings

HDMI1 Audio

Auto

4Use [Cursor K/L] to select “DTV CC”, then press [ENTER].

			Closedl	Captioni
			Conventional CC			Off
			Conventional CC			Off
			DTV CC			Off
			CC Style

5Use [Cursor K/L] to select the desired DTV closed caption, then press [ENTER].

			Closedl	Captioni
			Conventional CC
			Conventional CC
			DTV CC		Off
			CC Style		Service1
					Service2
					Service3
					Service4
					Service5
					Service6

	Off	Select if you do not want
	Off	DTV CC. This is the default.
		DTV CC. This is the default.

DTV CC		Select one of these before
DTV CC		changing any other item
		changing any other item
	Service1~6	in “Closed Caption” menu.
		Choose “Service1” under
		normal circumstances.

6Press [SETUP] to exit.

Note:

•“DTV CC” that you can switch differs depending on the broadcast description.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

27

EN

Image 27

Contents LC370SS8 To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect AntennaImportant note is located on the rear of the cabinet IntroductionRADIO-TV Interference PrecautionsLocation 5Supplied Accessories5Symbols Used in this Manual Quick start guide Remote controlFeatures ContentsDTV/TV/CATV 5Installing the Batteries 5Remote Control Function5Control Panel Connection to Cable Box or Satellite Box Connection5Basic Connection Antenna Cable Connection5External Device Connection Hdmi ConnectionHDMI-DVI Connection Video Cable Connection Component Video Cable ConnectionVideo Connection Audio Output Connection DigitalAnalog PC Connection Scanning and memorizing of channels start automatically Initial Setting5Initial Setup Make sure if the unit is connected to antenna or cable5Auto Channel Scan 5Main MenuEnter 5Language Selection5Channel Selection 5Volume AdjustmentWhat is the minor channel? Watching TV5Still Mode 5Switching Each ModeYou can freeze the image shown on the TV screen SAP 5Switching Audio ModeThis section describes how to switch the audio language StereoDay of Memories 5Screen InformationPress Info Broadcasting Information5TV Screen Display Mode 5Sleep Timer Press Sleep to set the sleep timerTo Cancel the Sleep Timer Optional Setting 5Channel ListChannel l List Channel you want to add, then press Enter 5Manual Register5Antenna Confirmation Use the Number buttons or CH K/L to select5Picture Adjustment Treble, Bass 5Sound AdjustmentYou can adjust treble, bass and surround Adjust the sound settingClosed Caption Detailil 5DTV Closed CaptionDTV CC Use Cursor K/L to select DTV CC, then press Enter5CC Style Font StyleFont Size Back Opacity Font ColorFont Opacity Back ColorChipip Enter password ChipChip ip Chipip Association of AmericaUse Cursor K/L to select TV Rating, then press To Set the Sub RatingsChipip Enter password Confirm password Use Cursor K/L to select New Password, then press Enter5PC Settings Clock, PhaseHorizontal Position, Vertical Position You can set the method of sound input for the Hdmi 1-IN jack 5HDMI Audio5Troubleshooting Guide TroubleshootingEntered channel number Check the batteries of the remote controlRefer to IR Signal Check on Delayed behind the dialogueAtsc MaintenanceInformation Glossary5Cable Channel Designations 5General Specifications5Electrical Specification 5Other SpecificationsMemo Limited Warranty

Related manuals

Manual 1 pages 35.39 Kb