Sylvania 6632LCT owner manual Hdmi Audio, Set the method of sound input for Hdmi jack

C New Password

4Display the “New Password” screen.

• Using [K/L], select “New Password”.

V-Chipip

MPAA Rating

TV Rating

New Password

•Press [ENTER].

5Change the Password.

•Use Channel number buttons on the remote control and enter the NEW 4-digit Password.

•Enter Password again in “Confirm Password” box.

V-Chipip

Enter password.

Confirm password.

PIN Code	Back
	Back

6To exit the setup, press [SETUP].

NOTES:

•Make sure to enter the exact same new password in the “Confirm Password” space as one in the space. If they are different, the space is cleared for reentering.

•Your password will be erased and return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you forget the password, unplug the power cord for 10 seconds to restore the pass- word to 0000.

HDMI AUDIO

Set the method of sound input for HDMI jack.

	STILL
-	0
SETUP	SCREEN
	MODE
	ENTER
BACK	INFO

1Display the setup screen.

•Press [SETUP].

The following setup screen is displayed.

2Select “DETAIL” and press [ENTER] to confirm.

•Using [K/L], select “HDMI Audio” and press [ENTER] to confirm.

Detailil

Closed Caption

V–chip

HDMI Audio Auto

3Switch the HDMI Audio.

•Using [K/L], select the desired HDMI Audio, then press [ENTER].

Detailil

Closed Caption
V–chip
HDMI Audio	Auto
	Digital
	Analog

• Select “Auto” if you connected to both digital device with HDMI jack and analog device for audio sources. Digital audio input signal has prior in this setting.

• Select “Digital” if you connected to digital device with HDMI jack for digital audio input signal.

• Select “Analog” if you connected to analog device with analog jacks for analog audio input signal.

4 To exit the setup, press [SETUP].

30

EN