Sylvania 6632LCT owner manual Troubleshooting Guide

TROUBLESHOOTING GUIDE

Before calling for service, check the following chart again.

Symptom	Remedy
No power	• Be sure the Power cord is connected to outlet.
	• If a power failure occurs, unplug the power cord for 30 minutes
	to allow the unit to reset itself.
No picture or sound	• Check if the power is on.
	• Check the outlet connection.
	• Check the antenna or cable connection to the main unit.
	• When the outside antenna is used, check the wire condition and
	connection.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
	• Turn off the power and wait for about 1 minute, then turn it on
	again.
No color	• Check the antenna or cable connection to the main unit.
	• When the outside antenna is used, check the wire condition and
	connection.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
	• Adjust the color in the setup screen.
Sound OK, Picture Poor	• Check the antenna or cable connection to the main unit.
	• When the outside antenna is used, check the wire condition and
	connection.
	• Electric waves may be interfered due to the electric appliances,
	etc. nearby.
	• Adjust Contrast and Brightness in the setup screen.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
Picture Distorted	• When the outside antenna is used, check the wire condition and
	connection.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
Weak Picture	• Check the antenna or cable connection to the main unit.
	• When the outside antenna is used, check the wire condition and
	connection.
	• Adjust Contrast and Brightness in the setup screen.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
Lines or Streaks in Picture	• When the outside antenna is used, check the wire condition and
	connection.
	• Electric waves may be interfered due to the electric appliances,
	etc. nearby.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
Picture blurred	• When the outside antenna is used, check the wire condition and
	connection.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
Ghosts in picture	• Check the antenna or cable connection to the main unit.
	• When the outside antenna is used, check the wire condition and
	connection.
	• Electric waves may be interfered due to the electric appliances,
	etc. nearby.
	• Try to view other channels. It may be the problem on the broad-
	casting station.
Bars on screen	• When the outside antenna is used, check the wire condition and
	connection.
	• Electric waves may be interfered due to the electric appliances,
	etc. nearby.

32

EN