JVC PD-42DV2, LCT1445-001A manual Zoom function, Cinema Surround function, „ Choose the Zoom mode

Page 17

Remote control buttons and functions

ZOOM function

You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.

AUTO:

When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode or FULL mode according to the WSS signal.

If a WSS signal is not included, the picture is displayed in accordance with the ZOOM mode set with the 4:3 AUTO ASPECT function.

•For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO ASPECT” on page 23.

•When the AUTO (WSS) mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, press the c button and change to another ZOOM mode.

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as its original size is.

PANORAMIC:

This mode stretches the left and right sides of a normal picture (4:3 Aspect Ratio) to fill the screen, without making the picture appear unnatural.

• The top and bottom of the picture are slightly cut off.

14:9 ZOOM:

This mode zooms up the Wide Picture (14:9 Aspect Ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This mode zooms up the Wide Picture (16:9 Aspect Ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This mode zooms up the Wide Picture (16:9 Aspect Ratio) with subtitles to the full screen.

FULL:

This mode uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.

Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), you can restore their original dimensions.

„Choose the ZOOM mode

1Press the cbutton to display the ZOOM menu

ZOOM

AUTO REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM

16:9 ZOOM SUBTITLE FULL

BACK

TV OK

D0009-EN

•The cbutton does not work in the twin pictures mode.

2Press the 6buttons to choose a ZOOM mode. Then press the abutton

The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.

„Adjusting the visible area of the picture

If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually.

1Press the cbutton

The ZOOM menu appears.

2Press16:9ZOOMthe abutton to display the ZOOM mode indication

IndicatorD0010-ENis displayed.

3While it is displayed, press the 6 buttons to adjust the visible area vertically

•You cannot adjust the visible area in REGULAR or FULL mode.

CINEMA SURROUND function

You can enjoy sounds with a wider ambience.

Press the 3button to turn the CINEMA SURROUND function on or off

•The CINEMA SURROUND function does not work properly with mono sound.

•The CINEMA SURROUND function can be also turned on or off by using the SOUND SETTING menu. For details, see “CINEMA SURROUND” on page 24.

ENGLISH

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents PD-42DV2 Page Distance recommendations EnglishBurn-in „ Do not view for long periods of time in the Regular modeAvoid burn-in as follows If Burn-in has occurredS.T. demonstration Point defectsEffect on infrared devices Contents Checking contents of packages Installation Setting up your TVPutting the batteries into the Remote control Manual and install the TV correctlyConnections Connection diagramTV back Receiver backConnecting the aerial and VCR Connecting the TV and receiver„ Receiver rear Connecting the power cord to the AC outletBack of the TV Back of the receiverInitial settings Press the blue button to start the Auto Program function TV buttons and functions Press the #Standby button to turn the TV on or off Remote control buttons and functionsTurn the TV on or off from standby mode Press the hInformation button to display „ Use the PR ListPR List To use the Programme number PR 0 AV„ Adjusting the visible area of the picture „ Choose the Zoom modeZoom function Cinema Surround functionUsing the Freeze function Using the PIP functionDisplaying the current time Return to TV channel instantlyOperating a JVC brand VCR or DVD player Using the MULTI-PICTURE function„ To use Dbutton VCRTeletext function Using the List ModeBasic operation HoldSub-page CancelReveal SizeUsing the TV’s menu Picture Mode Picture SettingPicture Adjustment White BalanceSuper DigiPure Picture FeaturesDigital VNR Pull Down Colour SystemAuto Aspect Colour ManagementSpeaker Sound SettingStereo / I BBEHeadphone VolumeTV Speaker OutputID List Video SettingChoose a Video terminal Press the blue button to display the name list ID ListSleep Timer FeaturesBlue Back Channel GuardPicture Shift RefreshSlow FastLanguage InstallAuto Program EDIT/MANUALMove „ IDInsert DeletePress the yellow button to delete the TV To cancel the Manual functionChannel If the TV channel reception is poorGroup Languages Changing the Teletext Language settingBefore connecting anything Connecting the external devicesAdditional preparation Front of the receiver„ Connecting Speakers/Amplifier „ Connecting devices to the OUT terminal„ Connecting headphones Australia CH/CC numbersTroubleshooting „ Other concerns Design and specifications subject to change without notice SpecificationsPage Page Page Victor Company of JAPAN, Limited
Top Page Image Contents