Teletext function
ENGLISH
Basic operation
1Choose a TV channel with a teletext broadcast
2Make sure to set the VCR/TV/DVD switch to the TV position.
3Press g(Text) button to display the teletext
Pressing g(Text) button changes the mode as follows:
Using the List Mode
You can store the numbers of your favourite teletext pages in memory and call them up quickly using the colour buttons.
To store the page numbers:
1Press Bbutton to engage the List mode
The stored page numbers are displayed at the bottom of the screen.
2Press a Colour button to choose a position. Then press the Number buttons to enter the page number
TEXT |
TEXT |
TV mode | TV and text mode | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TEXT |
|
|
|
|
|
| TEXT |
|
|
|
|
|
|
|
|
| ||
|
|
| Text mode |
| ||
D1043
4Choose a teletext page by pressing the pp buttons, Number buttons or Colour buttons
To return to the TV mode:
Press the bbutton or g(Text) button.
•If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station.
•The ZOOM function will not operate in the TV and text mode or Text mode.
•No menu operations are possible when viewing a teletext programme.
•Language display depends on the country which was set on the TELETEXT LANGUAGE menu. If characters on a Teletext programme do not appear properly, change the TELETEXT LANGUAGE Setting to other country’s. For detail, “Changing the TELETEXT LANGUAGE setting” on page 32.
When viewing a teletext programme, the text periodically moves a little at a time towards either the top or bottom of the screen. This is to prevent
3Press and hold down A(Store) button
The four page numbers blink white to indicate that they are stored in memory.
To call up a stored page:
1Press the Bbutton to engage the List mode
2Press a colour button to which a page has been assigned
To exit the List mode:
Press the Bbutton again.
Hold
You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received.
Press the C(Hold) button
Hold indication 
To cancel the Hold function:
Press C(Hold) button again.
•The Hold function is cleared if no operation is performed for approximately one minute.
18