JVC LCT1445-001A, PD-42DV2 manual „ Use the PR List, Press the hInformation button to display

Remote control buttons and functions

„Use the PR LIST:

1Press the h(Information) button to display the

PR LIST

Pressing the h(Information) button changes the display as follows:

Watch images from external devices

„Use the obutton:

Press the obutton to choose a VIDEO terminal.

ENGLISH

PR LIST
PR	ID
AV
01
02
03
04
05
06
07
08
09
TV	OK
-10	+10
D0011-EN

12 : 00

No indication

TV mode

Programme

numbers

PR 1 – PR 99

VIDEOV1VIDEO-1	modesV2VIDEOVIDEO--32S2
	or
V5VIDEO-5S5	V3VIDEOorV4-4S3
or

2Press the 5 and 6 buttons to choose a Programme number (PR). Then press the a button

•For Programme numbers (PR) with the CHANNEL GUARD function set, the n (CHANNEL GUARD) mark is displayed next to the Programme number (PR) in the PR LIST.

•You cannot use the 6 buttons to choose a Programme number (PR) with the CHANNEL GUARD function set.

•Even if you try to choose a Programme number (PR) with the CHANNEL GUARD function set, the n (CHANNEL GUARD) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHANNEL GUARD” on page 27.

•If you do not have a clear picture or no colour appears, follow the operation procedure “COLOUR SYSTEM” (see page 23).

•The sound system is chosen automatically. However, if you cannot hear the sound normally even when the picture appears normally, choose the sound system manually. Refer to the MANUAL on the “INSTALL” menu (see page 29) for details of choosing the sound system.

Adjust the volume

Press the r q buttons to adjust the volume. The Volume indicator appears and the volume changes as you press the r q buttons.

•The headphone volume is adjusted with the “HEADPHONE” menu (see page 25).

„Muting the sound

Press the l(muting) button to turn off the sound.

Pressing the l(muting) button again restores the previous volume level.

•The leading character is changed from V to S (eg V2 is changed to S2) when VIDEO-2, VIDEO-3, or VIDEO-5 are connected to the S terminal.

„Use the pp buttons:

Press the pp buttons to choose a VIDEO terminal.

„Use the PR LIST:

1Press the h(Information) button to display the

PR LIST

2Press the 5 and 6 buttons to choose a VIDEO terminal. Then press the abutton

•The VIDEO terminals are registered after the Programme number PR 99.

•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 23.

„To return to a TV channel:

Press the bbutton or the Number buttons.

To use the Programme number PR 0 (AV):

When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 29.

Pressing the obutton changes the choice as follows:

TV mode		VIDEOV1VIDEO-1			modesV2VIDEOVIDEO--32S2
Programme	PR 0	VIDEO-5
numbers						or
PR 1 – PR 99
				S5	V3	VIDorEO-4S3
		V5	or			V4

•The VCR RF channel is sent as the RF signal from the VCR.

•Also refer to your VCR instruction manual.

14