PICTURE FEATURES
ENGLISH
Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu.
PICTURE FEATURES
DIGITAL VNR | AUTO | |
Super DigiPure | AUTO | |
COLOUR SYSTEM |
| |
PULL DOWN | AUTO | |
4:3 AUTO ASPECT |
| |
COLOUR MANAGEMENT | ON | |
PIP |
|
|
| BACK |
|
TV | OK |
|
DIGITAL VNR
The DIGITAL VNR function cuts down the amount of noise in the original picture.
You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX.
AUTO:
The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture.
•If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can.
•AUTO cannot be chosen when you are watching the
Super DigiPure
The Super DigiPure function uses the latest in digital technology to give you a
DigiPure function:
This function helps to create a
You can choose from the three DigiPure function settings of AUTO, MIN and MAX.
•If you set the DigiPure effect too high on a
Picture motion compensation function:
This function displays
•The effect level of the picture motion compensation function cannot be changed. The effect level is the same no matter which of the AUTO, MIN or MAX settings is used.
1 Choose Super DigiPure
MIN:
The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN.
•The MIN setting is not suitable for
MAX:
The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX.
•The MAX setting is not suitable for
•When a
2Press the 5 buttons to choose a setting. Then press the abutton
AUTO:
The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture, giving the best possible picture.
•AUTO cannot be chosen when you are watching the
MIN:
The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN.
•The MIN setting is not suitable for
MAX:
The level of DigiPure effect is set to the maximum. If you set the Super DigiPure function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX.
•The MAX setting is not suitable for
OFF:
The Super DigiPure function is turned off.
22