JVC PD-42DV2 Using the MULTI-PICTURE function, Operating a JVC brand VCR or DVD player, Vcr, Dvd

Page 19

Remote control buttons and functions

Cancelling the PIP function:

Press the Rbutton or bbutton.

If the main-picture signal is poor, the quality of the sub-picture may also be poor.

If the pictures have different standards, the top and bottom of one of them may be missing.

If an external device is operated, the sub-picture may disappear. If this happens, press the Rbutton again to redisplay the sub-picture.

You cannot view a scrambled channel in the sub- picture. If the gbutton is pressed when viewing a scrambled channel in the main-picture using an external decoder, the channel you have been viewing in the sub-picture will appear in both the main-picture and sub-picture.

The ZOOM function does not work in the twin- picture mode.

Do not press the gbutton while you are recording the TV output on the VCR. If you do, the TV output signal will change.

The BLUE BACK function does not work in the twin picture mode or the picture-in-picture mode.

A progressive-scanning picture cannot be displayed as the sub-picture.

Pay attention to the following.

-When the VIDEO-4 picture is a progressive- scanning picture, you cannot choose VIDEO-4 with the p buttons.

-When the VIDEO-4 picture signal is changed to a progressive-scanning picture while the VIDEO-4 picture is displayed as the sub-picture, the PIP function is cancelled.

-The pictures cannot be swapped when a progressive-scanning picture from VIDEO-4 is being displayed as the main picture.

The sub-picture cannot be output from the TV.

Using the MULTI-PICTURE function

You can display multi-pictures that enable you to easily find a program you want to view.

1Press the Xbutton to display multi-pictures

The channels are displayed in the channel number order. The multi-pictures will appear in multi-picture mode.

12-pictures multi:

Still pictures

Moving picture

D0058-EN

2Press the pbuttons to choose the screen you want to see

The chosen picture changes to a moving picture.

3Press the abutton

The multi-pictures disappear and the chosen picture appears.

Cancelling the multi-pictures:

Press the bbutton, the number buttons or the a button.

Pictures from external devices cannot be displayed in the 12-pictures multi mode.

Operating a JVC brand VCR or DVD player

You can operate a JVC brand VCR or DVD player. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the original remote control.

1Set the VCR/TV/DVD Switch to the VCR or DVD position

VCR:

When you are operating the VCR, set the switch to the VCR position. You can turn the VCR on or off with the

#(Standby) button.

DVD:

When you are operating the DVD player, set the switch to the DVD position. You can turn the DVD player on or off with the #(Standby) button.

2Press the VCR/DVD Control Button to control your VCR or DVD player

If your device is not made by JVC, these buttons cannot be used.

Even if your device is made by JVC, some of these buttons or any one of the buttons may not work, depending on the device.

You can use the pbuttons to choose a TV channel. The VCR will receive or choose the chapter the DVD player plays back.

Some DVD player models use the p buttons for both operating of Fast forward/backward functions and choosing the chapter. In this case, the 253 buttons do not work.

Set the VCR/TV/DVD switch to the TV position when you turn the TV on or off.

„To use Dbutton

Some DVDs allow you to select the disc contents using the menu. When you playback these DVDs, you can select the subtitle language and sound-track language, etc. by using the DVD menu.

1Press Dbutton during play back

The DVD menu appears on the screen.

Press Dbutton again to resume playback at the scene when you pressed the button.

2Press 6 or 5 buttons to select the desired item

3Press abutton

ENGLISH

The menu continues to another screen.

Repeat steps 2 and 3 to set additional items if any.

17

Image 19
Contents PD-42DV2 Page Distance recommendations EnglishIf Burn-in has occurred „ Do not view for long periods of time in the Regular modeBurn-in Avoid burn-in as followsEffect on infrared devices Point defectsS.T. demonstration Contents Checking contents of packages Manual and install the TV correctly Setting up your TVInstallation Putting the batteries into the Remote controlReceiver back Connection diagramConnections TV backConnecting the aerial and VCR Connecting the TV and receiverBack of the receiver Connecting the power cord to the AC outlet„ Receiver rear Back of the TVInitial settings Press the blue button to start the Auto Program function TV buttons and functions Turn the TV on or off from standby mode Remote control buttons and functionsPress the #Standby button to turn the TV on or off To use the Programme number PR 0 AV „ Use the PR ListPress the hInformation button to display PR ListCinema Surround function „ Choose the Zoom mode„ Adjusting the visible area of the picture Zoom functionReturn to TV channel instantly Using the PIP functionUsing the Freeze function Displaying the current timeVCR Using the MULTI-PICTURE functionOperating a JVC brand VCR or DVD player „ To use DbuttonHold Using the List ModeTeletext function Basic operationSize CancelSub-page RevealUsing the TV’s menu White Balance Picture SettingPicture Mode Picture AdjustmentDigital VNR Picture FeaturesSuper DigiPure Colour Management Colour SystemPull Down Auto AspectBBE Sound SettingSpeaker Stereo / IOutput VolumeHeadphone TV SpeakerPress the blue button to display the name list ID List Video SettingID List Choose a Video terminalChannel Guard FeaturesSleep Timer Blue BackFast RefreshPicture Shift SlowEDIT/MANUAL InstallLanguage Auto ProgramDelete „ IDMove InsertIf the TV channel reception is poor To cancel the Manual functionPress the yellow button to delete the TV ChannelGroup Languages Changing the Teletext Language settingFront of the receiver Connecting the external devicesBefore connecting anything Additional preparation„ Connecting headphones „ Connecting devices to the OUT terminal„ Connecting Speakers/Amplifier Australia CH/CC numbersTroubleshooting „ Other concerns Design and specifications subject to change without notice SpecificationsPage Page Page Victor Company of JAPAN, Limited