JVC HV-Z29V1, HV-Z34L1, HV-Z34L1, HV-Z29L1 Features menu, White Balance, Digital VNR

Page 21

Using the TV’s menu

TINT

You can adjust the picture tint. 2 : reddish

3 : greenish

•You can change the TINT setting (picture tint) only when the colour system is NTSC 3.58 or NTSC 4.43.

To return to the default settings in each

PICTURE MODE:

Press the blue button. This will return the picture settings in the currently chosen PICTURE MODE to the default settings, and stores them in the PICTURE MODE again.

WHITE BALANCE

You can select one of three WHITE BALANCE modes (three tones of white) to adjust the white balance of the picture. Since white is the colour which is used as a reference for all the other colours, changing the WHITE BALANCE mode affects the appearance of all the other colours on the screen.

COOL:

A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture.

MID:

The normal white colour.

WARM:

A radish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films.

FEATURES menu

Choose FEATURES in the “PICTURE” menu and press the a or 3 button to display the sub-menu.

> FEATURES

	DIGITAL VNR		AUTO(LOW)
	Super DigiPure		AUTO
	PULL DOWN		AUTO
	Colour DigiPure		ON
	COLOUR SYSTEM
	ZOOM
	MULTI

OK

D1015-EN

DIGITAL VNR

The DIGITAL VNR function cuts down the amount of noise in the original picture. You can choose from the four DIGITAL VNR function settings of AUTO(LOW), AUTO(HIGH), MIN and MAX.

AUTO(LOW)/AUTO(HIGH):

The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture.

•If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO(LOW) setting if you can. If you set the DIGITAL VNR function to AUTO(LOW)but still notice some noise, change the setting from AUTO(LOW) to AUTO(HIGH).

MIN:

The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO(LOW) but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO(LOW) to MIN.

•The MIN setting is not suitable for low- quality pictures which contain a lot of noise.

21

Image 21

Contents HV-Z34L1 HV-Z29V1 S.T. demonstration Connecting the aerial and VCR Connecting the woofer unit only for HV-Z29V1If not connecting a VCR see Fig. a Fitting the woofer unitPutting the batteries into the remote control Connecting the power cordMaking the initial settings Setup TourNow, setting up is complete. Please enjoy your new JVC TV Turn the TV on from standby mode Turn the main power onAdjust the volume Remote control sensor 7 VIDEO-4 terminalVIDEO-2 Component terminal VIDEO-1 terminalVIDEO-3 Component terminal = Output terminal ~Press the # button Remote control buttons and functionsMuting button Watch images from an external deviceZoom button Cinema Surround buttonRETURN+ button Sound Mode buttonBass button RETURN+ functionChoose a TV channel or a Video terminal Display buttonFavorite channel registration Return functionTwin and PIP picture in picture function „ Setting the picture effect„ Recalling the favorite channel „ Showing the favorite channels„ TV channel selection „ Listening to the sound Sub-picture„ Input source selection TV, VIDEO-1, -2, -3 or „ Swapping the pictures„ Changing the sub picture Position in PIP mode only „ Setting the colour system Sub pictureMulti-picture function Freeze function Set the PIP/TV/DVD switch to the PIP positionStrobe function Press the Strobe buttonViewing a teletext programme Operating a JVC brand DVD playerSub-page Using the List mode SET UP menu Buttons used to operate the menus Types of menuPress the Hbutton to display the menu bar „ Adjusting the picture „ Picture ModePicture menu Operation with the buttons onTo return to the default settings in each Features menu„ White Balance „ Digital VNR„ Super DigiPure „ Pull DownDigiPure function Choose Colour SYSTEM. Then press the a or 3 button Press the 5 buttons to choose Main or SUBNtsc „ Zoom Sound menu„ Multi „ Stereo„ Headphone Volume „ Sound Mode„ Balance „ Cinema Surround„ Channel Guard „ Sleep Timer„ Blue Back „ Appearance„ Child Lock „ Auto Shutoff„ Video Setting „ Favorite SettingSetup menu „ Auto ProgramChoose Auto PROGRAM, then press the OK button Choose EDIT/MANUAL, then press the OK or 3 button „ EDIT/MANUALPress the 6 buttons to choose a new programme number FunctionsPress the 6 buttons to choose a PreparationProgramme number for which you will Register a new TV channel„ AI Volume „ VIDEO-2 SETTING/VIDEO-3 Setting„ Language „ Picture Tilt„ Teletext Language SettingPress the OK button to complete Choose Teletext LANGUAGE, thenChannel CH/CC numberBefore connecting anything „ Connecting the external DevicesConnecting devices to the Output terminal Connecting methodsConnecting Headphones „ Connecting AV Compu Link Supported DevicesSetting up the AV Compu Link remote control system If a VCR is connected to the VIDEO-2 Component terminal If a DVD player is connected to VIDEO-1 terminal„ If you cannot turn on the TV „ No picture/No sound„ Poor picture „ Poor sound „ Operation disabled„ Other concerns Design and specifications subject to change without notice SpecificationsVictor Company of JAPAN, Limited LCT1460-001A-H 1103-CR-JMT S.T. demonstration Setting up your TV Setup Tour Now, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal Remote control buttons and functions Adjust the volume RETURN+ button Display button Twin and PIP picture in picture function „ Listening to the sound Sub-picture Multi-picture function Freeze function Operating a JVC brand DVD player Sub-page Using the List mode Using the TV’s menu Picture menu Features menu „ Pull Down „ Colour System Sound menu „ Sound Mode Features menu „ Appearance „ Favorite Setting Setup menu „ EDIT/MANUAL Functions To cancel the Insert function „ Language „ Teletext Language CH/CC number Additional preparation Connecting methods Connecting Headphones If a DVD player is connected to VIDEO-1 terminal Troubleshooting „ Poor sound „ Other concerns Specifications Victor Company of JAPAN, Limited