JVC HV-Z29V1, HV-Z34L1, HV-Z34L1, HV-Z29L1 specifications Colour System

Page 67

Using the TV’s menu

Colour DigiPure

Makes the colour outline stand out and increases the sharpness giving a clearer picture.

ON:

Colour DigiPure works. Normally use with this function turned on.

OFF:

Colour DigiPure doesn’t work. This gives a less clear picture than when this function is turned on.

COLOUR SYSTEM

The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.

1Choose COLOUR SYSTEM. Then press the a or 3 button

The sub-menu of the COLOUR SYSTEM function appears.

>> COLOUR SYSTEM

MAIN	SUB
PAL	AUTO

OK

D0016-EN

2Press the 5 buttons to choose MAIN or SUB

MAIN:

You can change the colour system of the main-picture.

SUB:

You can change the colour system of the sub-picture.

•Choose MAIN when a sub-picture is not displayed.

3Press the 6 buttons to choose the appropriate colour system. Then press the a button

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

NTSC 3.58 MHz system

NTSC 4.43:

NTSC 4.43 MHz system

AUTO:

This function detects a colour system from the input signal.

•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.

For colour system in your country or region, refer to the table below:

	Area	Country or Region	System
		Bahrain, Kuwait, Oman,
		Qatar, United Arab Emirates,
		Yemen, etc.	PAL
		Indonesia, Malaysia,	PAL
		Indonesia, Malaysia,
		Singapore, Thailand, India,
	Asia,	etc.
	Middle	China, Vietnam, etc.	PAL
	East
	East	Hong Kong, etc.	PAL
		Hong Kong, etc.	PAL
		Islamic Republic of Iran,	SECAM
		Lebanon, Saudi Arabia, etc.	SECAM
		Lebanon, Saudi Arabia, etc.
		Philippines, Taiwan,	NTSC
		Myanmar, etc.	NTSC
		Myanmar, etc.
		Russia, etc.	SECAM
	Europe	Czech Republic, Poland, etc.	PAL
	Europe	Germany, Holland, Belgium,	PAL
		etc.	PAL
		etc.
		UK, etc.	PAL
	Oceania	Australia, New Zealand, etc.	PAL
		Republic of South Africa, etc.	PAL
	Africa	Nigeria, etc.	PAL
		Egypt, Morocco, etc.	SECAM

23

Image 67

Contents HV-Z34L1 HV-Z29V1 S.T. demonstration Fitting the woofer unit Connecting the woofer unit only for HV-Z29V1Connecting the aerial and VCR If not connecting a VCR see Fig. aSetup Tour Connecting the power cordPutting the batteries into the remote control Making the initial settingsNow, setting up is complete. Please enjoy your new JVC TV Remote control sensor 7 VIDEO-4 terminal Turn the main power onTurn the TV on from standby mode Adjust the volumeOutput terminal ~ VIDEO-1 terminalVIDEO-2 Component terminal VIDEO-3 Component terminal =Press the # button Remote control buttons and functionsCinema Surround button Watch images from an external deviceMuting button Zoom buttonRETURN+ function Sound Mode buttonRETURN+ button Bass buttonReturn function Display buttonChoose a TV channel or a Video terminal Favorite channel registration„ Showing the favorite channels „ Setting the picture effectTwin and PIP picture in picture function „ Recalling the favorite channel„ Swapping the pictures „ Listening to the sound Sub-picture„ TV channel selection „ Input source selection TV, VIDEO-1, -2, -3 or„ Setting the colour system Sub picture „ Changing the sub picture Position in PIP mode onlyMulti-picture function Press the Strobe button Set the PIP/TV/DVD switch to the PIP positionFreeze function Strobe functionViewing a teletext programme Operating a JVC brand DVD playerSub-page Using the List mode Buttons used to operate the menus Types of menu SET UP menuPress the Hbutton to display the menu bar Operation with the buttons on „ Picture Mode„ Adjusting the picture Picture menu„ Digital VNR Features menuTo return to the default settings in each „ White Balance„ Pull Down „ Super DigiPureDigiPure function Press the 5 buttons to choose Main or SUB Choose Colour SYSTEM. Then press the a or 3 buttonNtsc „ Stereo Sound menu„ Zoom „ Multi„ Cinema Surround „ Sound Mode„ Headphone Volume „ Balance„ Channel Guard „ Sleep Timer„ Auto Shutoff „ Appearance„ Blue Back „ Child Lock„ Video Setting „ Favorite Setting„ Auto Program Setup menuChoose Auto PROGRAM, then press the OK button Choose EDIT/MANUAL, then press the OK or 3 button „ EDIT/MANUALPress the 6 buttons to choose a new programme number FunctionsRegister a new TV channel PreparationPress the 6 buttons to choose a Programme number for which you will„ Picture Tilt „ VIDEO-2 SETTING/VIDEO-3 Setting„ AI Volume „ LanguageChoose Teletext LANGUAGE, then Setting„ Teletext Language Press the OK button to completeChannel CH/CC numberBefore connecting anything „ Connecting the external DevicesConnecting devices to the Output terminal Connecting methods„ Connecting AV Compu Link Supported Devices Connecting HeadphonesSetting up the AV Compu Link remote control system If a VCR is connected to the VIDEO-2 Component terminal If a DVD player is connected to VIDEO-1 terminal„ No picture/No sound „ If you cannot turn on the TV„ Poor picture „ Poor sound „ Operation disabled„ Other concerns Design and specifications subject to change without notice SpecificationsVictor Company of JAPAN, Limited LCT1460-001A-H 1103-CR-JMT S.T. demonstration Setting up your TV Setup Tour Now, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal Remote control buttons and functions Adjust the volume RETURN+ button Display button Twin and PIP picture in picture function „ Listening to the sound Sub-picture Multi-picture function Freeze function Operating a JVC brand DVD player Sub-page Using the List mode Using the TV’s menu Picture menu Features menu „ Pull Down „ Colour System Sound menu „ Sound Mode Features menu „ Appearance „ Favorite Setting Setup menu „ EDIT/MANUAL Functions To cancel the Insert function „ Language „ Teletext Language CH/CC number Additional preparation Connecting methods Connecting Headphones If a DVD player is connected to VIDEO-1 terminal Troubleshooting „ Poor sound „ Other concerns Specifications Victor Company of JAPAN, Limited