JVC HV-Z29V1, HV-Z34L1, HV-Z34L1, HV-Z29L1 specifications Setup menu

Page 73

Using the TV’s menu

3Press the 6 button to choose VIDEO, then press the 5 button to choose one of video inputs, VIDEO-1 to -4.

4Set the picture effect.

Press the 6 button to choose an item listed in the following table and press the 5 button to choose one of options.

•As explained in the table, if PICTURE EFFECT is set to OFF, the dedicated picture effect for the video inputs is not used. In this case, normal picture effect is used.

Item	Options
PICTURE MODE	BRIGHT*, STANDARD,
	SOFT
DIGITAL VNR	AUTO (LOW), AUTO
	(HIGH), MIN*, MAX
WHITE	COOL, MID*, WARM
BALANCE
Super DigiPure	AUTO, MAX*, OFF, MIN
PICTURE	ON*:
EFFECT	Above picture effect
	applies to the chosen
	video input.
	OFF:
	No picture effect applies.

*: When shipped

•For details of each item, see “PICTURE MODE” on page 20, “DIGITAL VNR” on page 21, “WHITE BALANCE” on page 21, “Super DigiPure” on page 22.

•When the signal is 625p or 525p:

-In “DIGITAL VNR”, AUTO

(LOW and HIGH) cannot be selected.

-In “Super DigiPure”, AUTO cannot be selected.

•Pressing the blue button will return the picture effect to the factory set value.

5Press the OK button to complete the setting.

SETUP menu

SET UP

	AUTO PROGRAM
	EDIT/MANUAL
	LANGUAGE
	PICTURE TILT
	VIDEO-2 SETTING	COMPONENT
	VIDEO-3 SETTING	COMPONENT
	AI VOLUME	ON
	TELETEXT LANGUAGE
OSD-9-EN

AUTO PROGRAM

You can automatically register the TV channels which can be received well at your residence in the TV’s programme numbers by performing the following.

1Choose AUTO PROGRAM, then press the OK button.

The AUTO PROGRAM function starts. The TV channels you receive are automatically stored in the programme numbers list.

>> AUTO PROGRAM

CH 28

14%

OK

D0004-EN

•To stop the AUTO PROGRAM function, press the OK button.

2After the TV channels have been stored in the programme number list, the EDIT menu appears.

> EDIT

PR	ID	CH/CC
AV
01		CH	21
02		CH	22
03		CH	23
04		CH	24
05		CH	25
06		CH	26
07		CC	01
08		CC	02
09		CC	03

ID MANUAL

OK MOVE

INSERT DELETE

D0038-EN

29

Image 73

Contents HV-Z34L1 HV-Z29V1 S.T. demonstration Connecting the aerial and VCR Connecting the woofer unit only for HV-Z29V1If not connecting a VCR see Fig. a Fitting the woofer unitPutting the batteries into the remote control Connecting the power cordMaking the initial settings Setup TourNow, setting up is complete. Please enjoy your new JVC TV Turn the TV on from standby mode Turn the main power onAdjust the volume Remote control sensor 7 VIDEO-4 terminalVIDEO-2 Component terminal VIDEO-1 terminalVIDEO-3 Component terminal = Output terminal ~Press the # button Remote control buttons and functionsMuting button Watch images from an external deviceZoom button Cinema Surround buttonRETURN+ button Sound Mode buttonBass button RETURN+ functionChoose a TV channel or a Video terminal Display buttonFavorite channel registration Return functionTwin and PIP picture in picture function „ Setting the picture effect„ Recalling the favorite channel „ Showing the favorite channels„ TV channel selection „ Listening to the sound Sub-picture„ Input source selection TV, VIDEO-1, -2, -3 or „ Swapping the pictures„ Setting the colour system Sub picture „ Changing the sub picture Position in PIP mode onlyMulti-picture function Freeze function Set the PIP/TV/DVD switch to the PIP positionStrobe function Press the Strobe buttonViewing a teletext programme Operating a JVC brand DVD playerSub-page Using the List mode Buttons used to operate the menus Types of menu SET UP menuPress the Hbutton to display the menu bar „ Adjusting the picture „ Picture ModePicture menu Operation with the buttons onTo return to the default settings in each Features menu„ White Balance „ Digital VNR„ Pull Down „ Super DigiPureDigiPure function Press the 5 buttons to choose Main or SUB Choose Colour SYSTEM. Then press the a or 3 buttonNtsc „ Zoom Sound menu„ Multi „ Stereo„ Headphone Volume „ Sound Mode„ Balance „ Cinema Surround„ Channel Guard „ Sleep Timer„ Blue Back „ Appearance„ Child Lock „ Auto Shutoff„ Video Setting „ Favorite Setting„ Auto Program Setup menuChoose Auto PROGRAM, then press the OK button Choose EDIT/MANUAL, then press the OK or 3 button „ EDIT/MANUALPress the 6 buttons to choose a new programme number FunctionsPress the 6 buttons to choose a PreparationProgramme number for which you will Register a new TV channel„ AI Volume „ VIDEO-2 SETTING/VIDEO-3 Setting„ Language „ Picture Tilt„ Teletext Language SettingPress the OK button to complete Choose Teletext LANGUAGE, thenChannel CH/CC numberBefore connecting anything „ Connecting the external DevicesConnecting devices to the Output terminal Connecting methods„ Connecting AV Compu Link Supported Devices Connecting HeadphonesSetting up the AV Compu Link remote control system If a VCR is connected to the VIDEO-2 Component terminal If a DVD player is connected to VIDEO-1 terminal„ No picture/No sound „ If you cannot turn on the TV„ Poor picture „ Poor sound „ Operation disabled„ Other concerns Design and specifications subject to change without notice SpecificationsVictor Company of JAPAN, Limited LCT1460-001A-H 1103-CR-JMT S.T. demonstration Setting up your TV Setup Tour Now, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal Remote control buttons and functions Adjust the volume RETURN+ button Display button Twin and PIP picture in picture function „ Listening to the sound Sub-picture Multi-picture function Freeze function Operating a JVC brand DVD player Sub-page Using the List mode Using the TV’s menu Picture menu Features menu „ Pull Down „ Colour System Sound menu „ Sound Mode Features menu „ Appearance „ Favorite Setting Setup menu „ EDIT/MANUAL Functions To cancel the Insert function „ Language „ Teletext Language CH/CC number Additional preparation Connecting methods Connecting Headphones If a DVD player is connected to VIDEO-1 terminal Troubleshooting „ Poor sound „ Other concerns Specifications Victor Company of JAPAN, Limited