Using the TV’s menu
•The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a picture in the no- signal state appears.
LANGUAGE
You can choose the language you want to use for the
1Choose LANGUAGE, then press the OK button.
2Press the 6 buttons to choose a language.
3Press the OK button to complete the setting.
The menu disappears.
PICTURE TILT
There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt.
1Choose PICTURE TILT, then press the OK or 3 button.
> PICTURE TILT
OK
2Press the 6 buttons until the picture becomes level. Then press the OK button.
VIDEO-2 SETTING/VIDEO-3
SETTING
Set the
VIDEO:
If a normal video signal (composite video signal) is input.
COMPONENT:
If a Component video signal (Y, Cb/Pb, Cr/Pr signals) is input.
•For detailed connecting methods, see “Additional preparation” on page 36. This Television is compatible with the 1125i, 625p or 525p video signal only when the component video signal is input.
•When the input signal is 1125i, 625p or 525p, each signal type is displayed at the upper right side on the TV screen by setting the input to
AI VOLUME
You can prevent the sudden increase or decrease of sound that occurs when changing the channel to another channel or switching the VIDEO mode to another VIDEO mode.
ON:
This function is turned on.
OFF:
This function is turned off.
•The AI VOLUME function may not operate as expected if the sound input level from a broadcast station (or video software) is extremely low.
•When the Video or the DVD is used, it is recommended to select OFF to get more dynamic sound.
33