JVC HV-Z29V1, HV-Z34L1 Connecting the woofer unit only for HV-Z29V1, Fitting the woofer unit

Page 3

Setting up your TV

CAUTION

•Turn off all the equipment including the TV before connecting anything.

1Connecting the woofer unit (only for HV-Z29V1)

1Fitting the woofer unit

Align the projection on the base of the woofer unit with the hole in the top of the TV, and insert the connector into the woofer terminal.

2Connecting the supplied woofer connector to the BASS SPEAKER OUT terminal on the back of the TV If the woofer unit is not connected, you will not be able to enjoy the bass sound.

•Connect so that the lever is raised.

•When disconnecting the woofer connector, do so while pushing the lever.

2Connecting the aerial and VCR

•Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable.

•Read the manual that came with the VCR before connecting.

If not connecting a VCR (see Fig. A):

Connect an aerial cable to the aerial socket on this TV.

If connecting a VCR (see Fig. B):

1Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable.

2Connect the VCR’s VIDEO OUT (video output) jack and the TV’s VIDEO jack with a video cable.

To connect a VCR to the TV with an S-VIDEO cable:

Connect the VCR’s S-VIDEO OUT (S- VIDEO output) connector and TV’s S connector with an S-VIDEO cable A, instead of connecting with a video cable.

3Connect the VCR’s AUDIO OUT (audio L/ R output) jacks and the TV’s AUDIO jacks (L/MONO and R) with an audio cable.

•If the VCR’s audio output is in mono, connect the VCR’s AUDIO OUT (audio output) jack and the TV’s AUDIO L/ MONO jack with an audio cable.

Lever

Fig. A

Fig. B A

3

Image 3

Contents HV-Z34L1 HV-Z29V1 S.T. demonstration Fitting the woofer unit Connecting the woofer unit only for HV-Z29V1Connecting the aerial and VCR If not connecting a VCR see Fig. aSetup Tour Connecting the power cordPutting the batteries into the remote control Making the initial settingsNow, setting up is complete. Please enjoy your new JVC TV Remote control sensor 7 VIDEO-4 terminal Turn the main power onTurn the TV on from standby mode Adjust the volumeOutput terminal ~ VIDEO-1 terminalVIDEO-2 Component terminal VIDEO-3 Component terminal =Press the # button Remote control buttons and functionsCinema Surround button Watch images from an external deviceMuting button Zoom buttonRETURN+ function Sound Mode buttonRETURN+ button Bass buttonReturn function Display buttonChoose a TV channel or a Video terminal Favorite channel registration„ Showing the favorite channels „ Setting the picture effectTwin and PIP picture in picture function „ Recalling the favorite channel„ Swapping the pictures „ Listening to the sound Sub-picture„ TV channel selection „ Input source selection TV, VIDEO-1, -2, -3 or„ Changing the sub picture Position in PIP mode only „ Setting the colour system Sub pictureMulti-picture function Press the Strobe button Set the PIP/TV/DVD switch to the PIP positionFreeze function Strobe functionViewing a teletext programme Operating a JVC brand DVD playerSub-page Using the List mode SET UP menu Buttons used to operate the menus Types of menuPress the Hbutton to display the menu bar Operation with the buttons on „ Picture Mode„ Adjusting the picture Picture menu„ Digital VNR Features menuTo return to the default settings in each „ White Balance„ Super DigiPure „ Pull DownDigiPure function Choose Colour SYSTEM. Then press the a or 3 button Press the 5 buttons to choose Main or SUBNtsc „ Stereo Sound menu„ Zoom „ Multi„ Cinema Surround „ Sound Mode„ Headphone Volume „ Balance„ Channel Guard „ Sleep Timer„ Auto Shutoff „ Appearance„ Blue Back „ Child Lock„ Video Setting „ Favorite SettingSetup menu „ Auto ProgramChoose Auto PROGRAM, then press the OK button Choose EDIT/MANUAL, then press the OK or 3 button „ EDIT/MANUALPress the 6 buttons to choose a new programme number FunctionsRegister a new TV channel PreparationPress the 6 buttons to choose a Programme number for which you will„ Picture Tilt „ VIDEO-2 SETTING/VIDEO-3 Setting„ AI Volume „ LanguageChoose Teletext LANGUAGE, then Setting„ Teletext Language Press the OK button to completeChannel CH/CC numberBefore connecting anything „ Connecting the external DevicesConnecting devices to the Output terminal Connecting methodsConnecting Headphones „ Connecting AV Compu Link Supported DevicesSetting up the AV Compu Link remote control system If a VCR is connected to the VIDEO-2 Component terminal If a DVD player is connected to VIDEO-1 terminal„ If you cannot turn on the TV „ No picture/No sound„ Poor picture „ Poor sound „ Operation disabled„ Other concerns Design and specifications subject to change without notice SpecificationsVictor Company of JAPAN, Limited LCT1460-001A-H 1103-CR-JMT S.T. demonstration Setting up your TV Setup Tour Now, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal Remote control buttons and functions Adjust the volume RETURN+ button Display button Twin and PIP picture in picture function „ Listening to the sound Sub-picture Multi-picture function Freeze function Operating a JVC brand DVD player Sub-page Using the List mode Using the TV’s menu Picture menu Features menu „ Pull Down „ Colour System Sound menu „ Sound Mode Features menu „ Appearance „ Favorite Setting Setup menu „ EDIT/MANUAL Functions To cancel the Insert function „ Language „ Teletext Language CH/CC number Additional preparation Connecting methods Connecting Headphones If a DVD player is connected to VIDEO-1 terminal Troubleshooting „ Poor sound „ Other concerns Specifications Victor Company of JAPAN, Limited