JVC HV-Z34L1, HV-Z29L1 Connecting Headphones, „ Connecting AV Compu Link Supported Devices

Page 38

Additional preparation

Connecting Headphones

Connect the headphones with a stereo mini jack (of 3.5 mm in diameter) to the Headphone jack at the TV front panel.

„Connecting AV COMPU LINK

Supported Devices

AV COMPU LINK remote control system is a system in which related devices are automatically controlled when you operate one device.

If you apply this system to the TV, you can have the TV automatically perform the required operations by operating one external device. You don’t have to use the TV’s remote control to turn on the TV or change the VIDEO modes.

Examples of the AV COMPU LINK remote control system operations

Simply by pressing the PLAY button on a VCR or a DVD player, you can view images from the device.

Simply by inserting a prerecorded tape (a tape with the record safety tab removed) to a VCR, you can view the tape.

Simply by operating the AV Control Receiver, you can have the TV turned on/off (in standby mode) or the VIDEO mode changed correctly.

•The performance of the AV COMPU LINK remote control system varies depending on the connected device. See the device’s instruction manual.

•When you select “TV SOUND” as the input source with the AV Control Receiver, there are cases where the TV’s MUTING function automatically operates and the sound from the TV’s speakers is muted.

In such cases, press the VOLUME-/+ buttons or the MUTING button on the TV’s remote control to cancel the MUTING function. You can regain the sound from the TV’s speakers.

38

Conditions to use the AV COMPU LINK remote control system

•A device equipped with an AV COMPU LINK terminal is required.

•You must connect the TV and the device with an AV COMPU LINK cable. AV COMPU LINK cable is not supplied with this TV. If an AV COMPU LINK cable is unavailable, connect them with a cable with dia. 3.5 mm (mono) male plugs at both ends.

•You must connect the device to an appropriate VIDEO terminal and set it up correctly. Otherwise the AV COMPU LINK remote control system will not function correctly. For details, see “Setting up the AV COMPU LINK remote control system”.

•The TV must be in standby mode (the POWER lamp lighting red). If the TV’s Main power is off (the POWER lamp off), the AV COMPU LINK remote control system does not function.

Setting up the AV COMPU LINK remote control system

CAUTION:

•With some devices, the setup method differs from the ones explained here. Be sure to read the device’s instruction manual thoroughly before setting it up.

1Connect the device to the TV’s VIDEO-1, VIDEO-2 (COMPONENT) or VIDEO-3 (COMPONENT) terminal.

If you want to connect a DVD player to the TV with a component video cable: Connect the DVD player to the TV’s VIDEO-2 (COMPONENT) or VIDEO-3 (COMPONENT) terminal.

•For detailed connecting instructions, see “Connecting the external devices” on page 36.

2Connect the TV’s AV COMPU LINK terminal and the device’s AV COMPU LINK terminal with an AV COMPU LINK cable.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents HV-Z34L1 HV-Z29V1 S.T. demonstration If not connecting a VCR see Fig. a Connecting the woofer unit only for HV-Z29V1Connecting the aerial and VCR Fitting the woofer unitMaking the initial settings Connecting the power cordPutting the batteries into the remote control Setup TourNow, setting up is complete. Please enjoy your new JVC TV Adjust the volume Turn the main power onTurn the TV on from standby mode Remote control sensor 7 VIDEO-4 terminalVIDEO-3 Component terminal = VIDEO-1 terminalVIDEO-2 Component terminal Output terminal ~Remote control buttons and functions Press the # buttonZoom button Watch images from an external deviceMuting button Cinema Surround buttonBass button Sound Mode buttonRETURN+ button RETURN+ functionFavorite channel registration Display buttonChoose a TV channel or a Video terminal Return function„ Recalling the favorite channel „ Setting the picture effectTwin and PIP picture in picture function „ Showing the favorite channels„ Input source selection TV, VIDEO-1, -2, -3 or „ Listening to the sound Sub-picture„ TV channel selection „ Swapping the picturesMulti-picture function „ Changing the sub picture Position in PIP mode only„ Setting the colour system Sub picture Strobe function Set the PIP/TV/DVD switch to the PIP positionFreeze function Press the Strobe buttonOperating a JVC brand DVD player Viewing a teletext programmeSub-page Using the List mode Press the Hbutton to display the menu bar SET UP menuButtons used to operate the menus Types of menu Picture menu „ Picture Mode„ Adjusting the picture Operation with the buttons on„ White Balance Features menuTo return to the default settings in each „ Digital VNRDigiPure function „ Super DigiPure„ Pull Down Ntsc Choose Colour SYSTEM. Then press the a or 3 buttonPress the 5 buttons to choose Main or SUB „ Multi Sound menu„ Zoom „ Stereo„ Balance „ Sound Mode„ Headphone Volume „ Cinema Surround„ Sleep Timer „ Channel Guard„ Child Lock „ Appearance„ Blue Back „ Auto Shutoff„ Favorite Setting „ Video SettingChoose Auto PROGRAM, then press the OK button Setup menu„ Auto Program „ EDIT/MANUAL Choose EDIT/MANUAL, then press the OK or 3 buttonFunctions Press the 6 buttons to choose a new programme numberProgramme number for which you will PreparationPress the 6 buttons to choose a Register a new TV channel„ Language „ VIDEO-2 SETTING/VIDEO-3 Setting„ AI Volume „ Picture TiltPress the OK button to complete Setting„ Teletext Language Choose Teletext LANGUAGE, thenCH/CC number Channel„ Connecting the external Devices Before connecting anythingConnecting methods Connecting devices to the Output terminalSetting up the AV Compu Link remote control system Connecting Headphones„ Connecting AV Compu Link Supported Devices If a DVD player is connected to VIDEO-1 terminal If a VCR is connected to the VIDEO-2 Component terminal„ Poor picture „ If you cannot turn on the TV„ No picture/No sound „ Operation disabled „ Poor sound„ Other concerns Specifications Design and specifications subject to change without noticeVictor Company of JAPAN, Limited LCT1460-001A-H 1103-CR-JMT S.T. demonstration Setting up your TV Setup Tour Now, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal Remote control buttons and functions Adjust the volume RETURN+ button Display button Twin and PIP picture in picture function „ Listening to the sound Sub-picture Multi-picture function Freeze function Operating a JVC brand DVD player Sub-page Using the List mode Using the TV’s menu Picture menu Features menu „ Pull Down „ Colour System Sound menu „ Sound Mode Features menu „ Appearance „ Favorite Setting Setup menu „ EDIT/MANUAL Functions To cancel the Insert function „ Language „ Teletext Language CH/CC number Additional preparation Connecting methods Connecting Headphones If a DVD player is connected to VIDEO-1 terminal Troubleshooting „ Poor sound „ Other concerns Specifications Victor Company of JAPAN, Limited
Top Page Image Contents