Reference Manual for the ADSL Modem Wireless Router DG834GSP
B-2 NETGEAR VPN Configuration
v1.0, June 2007
Step-By-Step Configuration
1. Configure the DG834GSP as in the Gateway-to-Gateway procedures using the VPN Wizard
(see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21), being certain
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
a. In Step 1, enter toFVL328 for the Connection Name.
b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address.
c. In Step 3, enter the following:
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
Figure B-1
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/DG834GSP.asp.
Unit WAN IP LAN IP LAN Subnet Mask
DG834G 14.15.16.17 10.5.6.1 255.255.255.0
FVL328 22.13.24.25 172.23.9.1 255.255.255.0
GatewayA
22.23.24.25
14.15.16.17
10.5.6.0/24 172.23.9.0/24
172.23.9.110.5.6.1
WAN IP WAN IP LANIPLAN IP
GatewayB
VPNC Example
Network Interface Addressing
DG834G FVL328