Camco 1550E, 950E, 2050E, 1150E CAM AND/OR Input Shaft Replacement, Input Shaft Removal

Page 10

2.Install heavy-duty washer and socket head cap screw, assembled as shown in sketch titled "Cam Follower Replacement E-Series Index Drives" in this Service Manual. Use Red Perma-Lok®‚ and torque the socket head cap screw to specification. The tightening torque depends on the size of the cam follower. See the table titled "Torque Requirements for Tightening Screws" in this Service Manual for tightening torque.

3.Install bore plug.

4.Repeat steps to install all cam followers.

5.If a new cam is being installed, install all but two (2) cam followers. See the sec- tion titled "Cam and/or input Shaft Replacement" in this Service Manual.

6.Re-install the socket head cap screws and follower access cover, using "General Electric Silicone Rubber RTV-6" or equiv- alent as a sealant.

7.Re-install the socket head cap screws and side access cover. This is an exter- nal cover and sealant is not required.

CAM AND/OR INPUT SHAFT REPLACEMENT:

INPUT SHAFT REMOVAL:

Instructions for removing the cam and input shaft assume the follower wheel will not be removed. If the follower wheel will be removed, proceed to the section titled "Follower Wheel and/or Output Bearing Replacement" in this Service Manual. Otherwise, proceed with the following steps.

If the machine builder has provided access holes to the cam follower screws, complete removal of the support structure and fixtures is not mandatory. The cam can be supported during removal with a threaded rod through one of the cam follower stud holes.

Otherwise, the support structure and fixtures must be removed, or the support structure and fixtures can be lifted two to three feet above the unit and supported by appropriate scaffolding. CAMCO recommends using pro- fessional machinery riggers for this purpose. The assistance of a CAMCO trained service- man is recommended.

E-SERIES INPUT SHAFT AND CAM REMOVAL

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Heavy Duty Series Index Drives Models Table of Contents Introduction Spare Parts KIT Torque Requirements for Tightening Screws Disassembly Disassembly and InspectionInspection OIL Seal Installation OIL Seal ReplacementOIL Seal Removal CAM Follower Replacement Series Index Drives CAM Follower ReplacementCAM Follower Removal CAM Follower Installation Input Shaft Removal CAM AND/OR Input Shaft ReplacementSeries Input Shaft and CAM Removal Page Page Page CAM Installation CAM RemovalInput Shaft Installation Setting CAM Input Preload TorquePage Follower Wheel Removal Dwell POSITION, E-SERIES Index DrivesOutput Bearing Installation Output Bearing RemovalFinal Assembly Follower Wheel InstallationOn NON-WARRANTY HOW to Order PartsOn Warranty Required Information950E, 1150E, 1550E, & 2050E Parts List 950E Index Drive Standard Configuration Parts List 1150E Index Drive Standard Configuration Parts List 1550E Index Drive Standard Configuration Parts List 2050E Index Drive Standard Configuration USA 5/00

950E, 1550E, 2050E, 1150E specifications

Camco, an industry leader in innovative recreational vehicle (RV) and marine products, offers a range of portable waste tanks designed for convenience and efficiency. The Camco 1150E, 2050E, 1550E, and 950E are key products in this lineup, each designed with unique features and technologies to cater to different user needs.

The Camco 1150E is a robust 11-gallon portable waste tank made from high-density polyethylene. Featuring a patented, heavy-duty design, it can be easily transported and features integrated wheels for smooth maneuverability. The tank includes a large capacity dump valve and a 3" sewer hose with a 90-degree elbow, making emptying a simple and mess-free process. This model also comes with a built-in indicator to alert users when it’s time to empty, ensuring hassle-free maintenance.

The Camco 2050E is a larger 20-gallon option that offers enhanced capacity for extended trips. This model boasts a durable construction resistant to punctures and UV damage, ensuring longevity in various environments. The 2050E is designed with an extra-wide opening for easier filling and features a user-friendly tow design that ensures stability during transport. Its integrated handle and sturdy wheels allow for effortless movement, even on uneven surfaces.

The Camco 1550E is a middle-ground solution with a 15-gallon capacity, perfect for those who need more than the 11-gallon but less than the 20-gallon capacity. It features the same heavy-duty construction found in the 1150E and 2050E models, ensuring durability. It includes a level indicator to gauge fill levels and is designed for easy cleaning post-use, featuring smooth surfaces that reduce dirt accumulation.

Lastly, the Camco 950E is the most compact option at a 9-gallon capacity. Its lightweight design makes it ideal for short trips or users with limited storage space. Despite its smaller size, it retains the essential features such as a 3" drain hose, an easy-grip handle, and sufficient capacity for less frequent RV users.

Each tank in the Camco lineup offers high-quality construction, user-friendly features, and advanced technology to enhance the RV experience. Whether it’s the larger capacity of the 2050E or the compact design of the 950E, Camco has tailored their products to meet a range of consumer needs while ensuring ease of use and maintenance.
Top Page Image Contents