Camco 2050E, 950E, 1550E HOW to Order Parts, Required Information, To Order Parts, On Warranty

Page 21

the bearing to ensure that new grease is being distributed throughout the bearing and not just purging past the seals. Inject the recommended amount divided by the number of stops during each index for one full revolution of the table.

WARNING

CAMCO’s Heavy Duty "E" Series Index Drives cannot be "hand cranked" when completely assembled, i.e. with follower wheel installed. During some portions of repair, the motor drive package is used to rotate the input shaft and follower wheel. Some means for running the motor at extremely low speeds is manda- tory. Use extreme caution when operating the motor during repairs.

HOW TO ORDER PARTS:

Please refer to the parts lists shown in this Service Manual. These parts lists are for stan- dard Index Drives. If you feel your drive is nonstandard or you are in doubt, you should contact CAMCO Customer Service at (847) 459-5200 and request a Bill of Materials for your specific unit based on its serial number. Alternatively, contact your local CAMCO Sales Representative. A complete list of CAMCO Sales Offices is available on CAMCO’s web site, (http://www.camcoindex.com). CAMCO maintains hard copy records on all units for a period of seven (7) years.

You may order parts per the standard Bill of Material even if your unit is nonstandard. CAMCO’s Customer Service Representative will review the closed order file based on the following information and supply you with the correct part.

REQUIRED INFORMATION:

1.Original purchase order number (if available)

2.Customer name

(original purchaser of drive )

3.Model number (located on name plate)

4.Serial number (located on name plate) (essential when ordering parts)

5.Approximate date of purchase

TO ORDER PARTS:

Contact CAMCO’s "Order Entry Department" Wheeling, Illinois, Phone (847) 459-5200 or FAX (847) 459-3064,

E-mail: mktg@camcoindex.com,

or Internet: http://www.camcoindex.com Describe the parts required and the 14 digit part number as listed in the Standard Bill of Materials or a Special Bill of Materials pertain- ing to your unit. State if you are using a Standard or Special Bill of Materials.

Give as much of the above required information as possible.

ON WARRANTY:

CAMCO will send replacement parts freight prepaid via the most practical means.

CAMCO will issue a "Returned Material Authorization Number" (RMA#) for the return of defective parts for inspection. CAMCO will invoice customer for repair parts. When inspection of returned parts has been completed and determined to be a warranty problem, CAMCO will then issue a credit to the customer for repair parts and freight charges.

ON NON-WARRANTY:

Replacement or spare parts, with approved credit, are F.O.B. our plant Wheeling, Illinois.

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Heavy Duty Series Index Drives Models Table of Contents Introduction Spare Parts KIT Torque Requirements for Tightening Screws Disassembly and Inspection DisassemblyInspection OIL Seal Replacement OIL Seal InstallationOIL Seal Removal CAM Follower Replacement CAM Follower Replacement Series Index DrivesCAM Follower Removal CAM Follower Installation CAM AND/OR Input Shaft Replacement Input Shaft RemovalSeries Input Shaft and CAM Removal Page Page Page CAM Removal CAM InstallationInput Shaft Installation Input Preload Torque Setting CAMPage Dwell POSITION, E-SERIES Index Drives Follower Wheel RemovalOutput Bearing Removal Output Bearing InstallationFollower Wheel Installation Final AssemblyOn Warranty HOW to Order PartsOn NON-WARRANTY Required Information950E, 1150E, 1550E, & 2050E Parts List 950E Index Drive Standard Configuration Parts List 1150E Index Drive Standard Configuration Parts List 1550E Index Drive Standard Configuration Parts List 2050E Index Drive Standard Configuration USA 5/00

950E, 1550E, 2050E, 1150E specifications

Camco, an industry leader in innovative recreational vehicle (RV) and marine products, offers a range of portable waste tanks designed for convenience and efficiency. The Camco 1150E, 2050E, 1550E, and 950E are key products in this lineup, each designed with unique features and technologies to cater to different user needs.

The Camco 1150E is a robust 11-gallon portable waste tank made from high-density polyethylene. Featuring a patented, heavy-duty design, it can be easily transported and features integrated wheels for smooth maneuverability. The tank includes a large capacity dump valve and a 3" sewer hose with a 90-degree elbow, making emptying a simple and mess-free process. This model also comes with a built-in indicator to alert users when it’s time to empty, ensuring hassle-free maintenance.

The Camco 2050E is a larger 20-gallon option that offers enhanced capacity for extended trips. This model boasts a durable construction resistant to punctures and UV damage, ensuring longevity in various environments. The 2050E is designed with an extra-wide opening for easier filling and features a user-friendly tow design that ensures stability during transport. Its integrated handle and sturdy wheels allow for effortless movement, even on uneven surfaces.

The Camco 1550E is a middle-ground solution with a 15-gallon capacity, perfect for those who need more than the 11-gallon but less than the 20-gallon capacity. It features the same heavy-duty construction found in the 1150E and 2050E models, ensuring durability. It includes a level indicator to gauge fill levels and is designed for easy cleaning post-use, featuring smooth surfaces that reduce dirt accumulation.

Lastly, the Camco 950E is the most compact option at a 9-gallon capacity. Its lightweight design makes it ideal for short trips or users with limited storage space. Despite its smaller size, it retains the essential features such as a 3" drain hose, an easy-grip handle, and sufficient capacity for less frequent RV users.

Each tank in the Camco lineup offers high-quality construction, user-friendly features, and advanced technology to enhance the RV experience. Whether it’s the larger capacity of the 2050E or the compact design of the 950E, Camco has tailored their products to meet a range of consumer needs while ensuring ease of use and maintenance.
Top Page Image Contents