Eiki LC-XT1 instruction manual Replaced

Page 41

LC-XT1

1 Turn the projector on, and press the MENU button and the ON- SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING MENU will appear.

2

3

4

Press the POINT DOWN button and a red-arrow icon will appear.

Move the arrow to “Lamp age” and then press the SELECT button.

Move the arrow to replaced lamp number and then press the SELECT button. The message “Lamp replace monitor Reset?” is displayed.

NOTE: Be sure to reset correct lamp number otherwise LAMP REPLACEMENT indicator continues lighting.

Select to reset the Timer.

Do not reset the Lamp Replacement Monitor Timer, except after the lamp is

replaced.-

The language used in the ON-SCREEN MENU is selectable from among English, German, French, Italian, Spanish and Japanese.

1 Press the MENU button and the ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select LANGUAGE and press the SELECT button. Another dialog box LANGUAGE Menu will appear.

2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the language that you want to set, and then press the SELECT button.

.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Model LC-XT1 To the Owner Safety Precautions Compliances Table of Contents Features and Design LC-XT1 This projector uses nominal input voltages LC-XT1 LC-XT1 Pull out the terminal by holding the handle LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 Turning on the Projector LC-XT1 LC-XT1 LC-XT1 RGB LC-XT1 LC-XT1 Appear. Press the Point RIGHT/LEFT button to Clamp LC-XT1 ‘-‘C’’ Press the Point Down button and a red-arrow icon will Video Video System Menu will appear LC-XT1 LC-XT1 Power management To change the code of the projector Replaced LC-XT1 Recommendation Lamp Replace Indicator Display LC-XT1 LC-XT1 LC-XT1 HDB 15-PIN Terminal Analog LC-XT1 LC-XT1
Top Page Image Contents