Eiki LC-XT1 instruction manual This projector uses nominal input voltages

Page 8

LC-XT1

This projector uses nominal input voltages of 100-120

Vor 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the

projector on. (Refer to pages 12 15 for connection.)

.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model LC-XT1 To the Owner Safety Precautions Compliances Table of Contents Features and Design LC-XT1 This projector uses nominal input voltages LC-XT1 LC-XT1 Pull out the terminal by holding the handle LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 LC-XT1 Turning on the Projector LC-XT1 LC-XT1 LC-XT1 RGB LC-XT1 LC-XT1 Appear. Press the Point RIGHT/LEFT button to Clamp LC-XT1 ‘-‘C’’ Press the Point Down button and a red-arrow icon will Video Video System Menu will appear LC-XT1 LC-XT1 Power management To change the code of the projector Replaced LC-XT1 Recommendation Lamp Replace Indicator Display LC-XT1 LC-XT1 LC-XT1 HDB 15-PIN Terminal Analog LC-XT1 LC-XT1
Top Page Image Contents