Emerson CR202EM8 owner manual 5DTV Closed Caption, Press Menu to exit

3Press [MENU] to exit.

MENU

Note:

•To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

•Not all TV programs and commercials have the closed caption or all types of the closed caption.

•Captions and texts may not match the TV voice exactly.

•Changing channels may delay the closed caption for a few seconds.

•Adjusting or muting the volume may delay the closed caption for a few seconds.

•Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a problem with the unit.

•The caption or text characters will not be displayed while the main menu or functions display is shown.

•If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select “C1”, “C2” or “OFF”.

•If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

-Automobile ignition noise

-Electric motor noise

-Weak signal reception

-Multiplex signal reception (ghosts or screen flutter)

•The unit retains the closed caption setting if the power fails.

•When the unit receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the unit may not display the correct caption or text.

5DTV Closed Caption	INTRODUCTION
DTV

In addition to the basic closed caption described on page 16, DTV has its own closed caption called DTVCC. Use this menu to change the settings for

DTVCC.

									CONNECTION
1 Press [MENU] to display the main menu.
MENU
2 Use [CH	K	/ L] to select “DTV SETUP“,							INITIAL
then press [VOL X] .
				e.g.) digital TV mode					SETTING
	CH				-		TV SETUP -
	or				PICTURE
	CH				CHANNEL SETUP
					V-CHIP SETUP
					LANGUAGE		[ENGLISH]
					CAPTION		[OFF]
					DTV SETUP				WATCHINGTV
VOL
3 Use [CH	K	/ L] to select “DTVCC“, then press [VOL X] .
				e.g.) digital TV mode
	CH				-		DTV SETUP -		OPTIONAL
	CH				DTV DISPLAY [LETTERBOX]
	or
					DTVCC
									SETTING
VOL
									TROUBLESHOOTING
4 Use [CH	CH						- DTVCC -
	K		/ L] to select “CAPTION SERVICE“, then use
[VOL X / Y] to change the setting.
	or
					CAPTION SERVICE			[OFF]
	CH				USER SETTING			[OFF]
					CAPTION SIZE			[MIDDLE]
					FONT STYLE			[STYLE1/8]
					CHARACTER EDGE [NONE]				INFORMATION
					FORE OPACITY			[SOLID]
					FORE COLOR			[WHITE]
VOL	or		VOL		BACK OPACITY			[SOLID]
					BACK COLOR			[BLACK]
				OFF		Select if you do not want
						DTVCC. This is the default.
CAPTION SERVICE						Select one of these before
						changing any other item in
				SERVICE1~6		“CAPTION” menu. Choose
						“SERVICE1/6” under normal
						circumstances.

5Press [MENU] to exit.

MENU

Note:

•“CAPTION SERVICE” that you can switch differs depending on the broadcast description.

17

EN