Emerson CR202EM8 owner manual Precautions, RADIO-TV Interference

Page 3

15.POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18.SERVICING - Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.DAMAGE REQUIRING SERVICE - Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV.

c.If the TV has been exposed to rain or water.

d.If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.

e.If the TV has been dropped or damaged in any way.

f.When the TV exhibits a distinct change in performance, this indicates a need for service.

20.REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.SAFETY CHECK - Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22.HEAT - This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

INTRODUCTION CONNECTION INITIAL SETTING

5Precautions

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

3

EN

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CR202EM8 To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect AntennaImportant note is located on the rear of the cabinet IntroductionRADIO-TV Interference PrecautionsTo Avoid the Hazards of Electrical Shock and Fire 5Supplied Accessories5Symbols Used in this Manual LocationFeatures ContentsDTV/TV/CATV 5Installing the Batteries 5Remote Control Function5Rear Panel 5Control PanelConnection to Cable Box or Satellite Box Connection5Basic Connection Antenna Cable ConnectionVideo Cable Connection Front 5External Device ConnectionVideo or Video Cable Connection Rear RCA video cableMake sure if the unit is connected to antenna or cable Initial Setting5Initial Setup 5Main MenuEnglish 5Auto Channel Scan5Language Selection Scanning and memorizing the channels automatically start5Volume Adjustment Watching TV5Channel Selection 5Screen Information 5Switching Each ModeAnalog Mode Digital Mode5TV Screen Display Mode 5Sleep TimerTo Cancel the Sleep Timer Optional Setting 5Channel Add/DeleteTo add or delete another channels, repeat steps 4 to OFF 5Picture AdjustmentBright Contrast Tint SharpnessPress Menu to exit 5DTV Closed Caption5DTVCC Style Dpage ChipTo Set the Sub Ratings TV RatingMpaa Rating 5Troubleshooting Guide TroubleshootingMaintenance With an AM radioWith a digital camera including built-in cell phone cameras Information Memo Limited Warranty Manual del Usuario Introducción Importante para su SeguridadPrecauciones CuidadoInterferencia DE RADIO-TELEVISIÓN Para Evitar LOS Riesgos DE Descarga Eléctrica E Incendio 5Accesorios Suministrados5Símbolos Utilizados en este Manual UbicaciónContenido Características5Función de Mando a Distancia 5Instalación de las PilasMenu button p 5Panel Trasero 5Panel de ControlConexión a Caja de Cable o Caja de Satélite Conexión5Conexión Básica Conexión de Cable de AntenaConexión de Cable de Vídeo Delantera 5Conexión de Dispositivo ExternoConexión de Cable de S-video o de Vídeo Trasera Cable RCA de vídeo5Configuración Inicial Ajuste Inicial5Menú Principal 5Selección de Idioma EspañolFrançais English Para utilizar los botones numéricos 5Ajuste de VolumenPara VER LA Televisión 5Selección de CanalModo Digital 5Para Cambiar entre Cada Modo5Información de Pantalla Modo AnalógicoZoom 5Modo de Visualización de Pantalla del Televisor5Temporizador de Apagado Ancho BuzónPara agregar o borrar otros canales, repita los pasos Ajuste Opcional5Agregar/Borrar Canales Utilice VOL X / Y para seleccionar Agregar o BorrarSUBTIT2 C2 y TEXTO2 T2 5Ajuste de ImagenVOL Y Modo de Subtítulos SUBTIT1 C1 y TEXTO1 T1Utilice CH Para seleccionar DTVCC, y luego Luego presione VOL5Estilo Dtvcc Chip Cuando no haya configurado su contraseña, introduzcaPara Ajustar las Subcategorías Clase de TVVuelva a introducir la contraseña en el espacio Clase de Mpaa5Guía de Solución de Problemas Solución DE ProblemasMantenimiento Sintonice la emisora de radio AM en una frecuenciaDe no emisión. Apunte con el mando a distancia Información EMO Garantía Limitada

CR202EM8 specifications

The Emerson CR202EM8 is an advanced temperature and humidity controller designed to meet the needs of various applications, including HVAC systems and refrigeration units. This device showcases Emerson's commitment to innovation and efficiency, providing users with reliable performance and enhanced operational capabilities.

One of the main features of the CR202EM8 is its precise temperature control. With a temperature range of -40°C to 85°C, it allows for versatile applications in both commercial and residential settings. The controller’s high accuracy ensures that users can maintain optimal conditions, whether in a cold storage facility or a temperature-sensitive environment.

Another key characteristic of the CR202EM8 is its integrated humidity sensor. This feature allows for real-time monitoring and control of humidity levels, which is crucial in preventing mold growth and preserving product integrity in various storage situations. The device supports both temperature and humidity control, making it a comprehensive solution for those looking to optimize their environmental conditions.

The CR202EM8 also boasts user-friendly programming and a clear display interface. The intuitive menu system simplifies setup and configuration, enabling users to quickly adjust settings according to their specific requirements. Additionally, the backlit LCD display ensures that data is easily readable, even in low-light environments.

Durability is another important aspect of the CR202EM8. Built with high-quality materials, this controller is designed to withstand the rigors of various industries. Its robust construction ensures longevity and reliability, contributing to lower maintenance costs and reduced downtime.

Furthermore, the Emerson CR202EM8 is equipped with advanced communication capabilities. It supports various protocols, including MODBUS, facilitating integration into existing systems. This feature allows for seamless data exchange and remote monitoring, enhancing operational efficiency.

Energy efficiency is also a significant consideration in the design of the CR202EM8. By implementing smart algorithms, the controller optimizes energy consumption, leading to lower utility bills and a reduced carbon footprint.

In conclusion, the Emerson CR202EM8 temperature and humidity controller embodies cutting-edge technology with its precision control, integrated humidity monitoring, user-friendly interface, durability, advanced communication capabilities, and energy-efficient operation. These features make it an ideal choice for businesses and homeowners looking to maintain reliable and optimal environmental conditions.
Top Page Image Contents