Emerson CR202EM8 owner manual Maintenance, With an AM radio

Page 23

Symptom

Remedy

The entered channel number

• Many digital channels have alternate channel numbers. The unit changes the

changes automatically

numbers automatically to the ones signifying the broadcasting stations. These are

 

the numbers used for analog broadcasts.

Remote control does not work

• Check the antenna or cable connection to the main unit.

 

• Check the batteries of the remote control.

 

• Check if there is an obstacle between the infrared sensor window and the remote

 

control.

 

• Test the signal output. If OK, then possible infrared sensor trouble.

 

(Refer to “IR Signal Check” on page 23.)

 

• Aim the remote control directly at the infrared sensor window on the front of the

 

unit.

 

• Reduce the distance to the unit.

 

• Re-insert the batteries with their polarities (+/– signs) as indicated.

 

Problems with Closed Caption Feature

 

 

Misspelled captions are

• Closed captioning production companies may broadcast programs without

displayed.

correcting the misspelling in a live broadcast.

Captions are not entirely

• Captions that are delayed a few seconds behind the actual dialogue are common for

displayed, or captions are

live broadcasts. Most captioning production companies can display a dialogue to a

delayed behind the dialogue.

maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is

 

used to insure that the captions remain up-to-date with the current TV screen dialogue.

Captions are displayed as a

• Interference from buildings or weather conditions may cause captioning to be

white box.

incomplete.

No caption is displayed in the

• Broadcasting station may shorten the program to insert advertisement. The closed

closed caption-supported

caption decoder cannot read the information of the shortened program.

program.

 

No caption is displayed

• The videotape may be illegally copied, or the caption signal might not have been

when playing the videotape

read during copying.

containing captions.

 

Black box is displayed in the

• The text mode is selected for caption. Select “C1”, “C2” or “OFF”.

TV screen.

 

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING

Note:

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

5Maintenance

Cabinet Cleaning

IR Signal Check

TROUBLESHOOTING

•Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Degaussing

A degaussing circuit in this unit clears up color errors on the TV screen. Color errors occur when there is any excess magnetism close to the unit. This circuit is designed to operate once when the unit is first plugged in. If you see minor color errors on the TV screen, unplug the unit for approximately 30 minutes. When you plug the unit again, the degaussing circuit will operate to clear errors. Take this step any time the TV screen is accidentally magnetized or when you move the unit.

If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

•With an AM radio:

Tune the AM radio station to a non-broadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote control’s infrared signal.

• With a digital camera (including built-in cell phone cameras):

Point a digital camera towards the remote control. Push any button on the remote control and look

through the digital camera. If the infrared light appears through the camera, the remote control is working.

23

EN

INFORMATION

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CR202EM8 To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect AntennaImportant note is located on the rear of the cabinet IntroductionRADIO-TV Interference PrecautionsTo Avoid the Hazards of Electrical Shock and Fire 5Supplied Accessories5Symbols Used in this Manual LocationDTV/TV/CATV FeaturesContents 5Installing the Batteries 5Remote Control Function5Rear Panel 5Control PanelConnection to Cable Box or Satellite Box Connection5Basic Connection Antenna Cable ConnectionVideo Cable Connection Front 5External Device ConnectionVideo or Video Cable Connection Rear RCA video cableMake sure if the unit is connected to antenna or cable Initial Setting5Initial Setup 5Main MenuEnglish 5Auto Channel Scan5Language Selection Scanning and memorizing the channels automatically start5Channel Selection 5Volume AdjustmentWatching TV 5Screen Information 5Switching Each ModeAnalog Mode Digital ModeTo Cancel the Sleep Timer 5TV Screen Display Mode5Sleep Timer To add or delete another channels, repeat steps 4 to Optional Setting5Channel Add/Delete OFF 5Picture AdjustmentBright Contrast Tint SharpnessPress Menu to exit 5DTV Closed Caption5DTVCC Style Dpage ChipTo Set the Sub Ratings TV RatingMpaa Rating 5Troubleshooting Guide TroubleshootingWith a digital camera including built-in cell phone cameras MaintenanceWith an AM radio Information Memo Limited Warranty Manual del Usuario Introducción Importante para su SeguridadInterferencia DE RADIO-TELEVISIÓN PrecaucionesCuidado Para Evitar LOS Riesgos DE Descarga Eléctrica E Incendio 5Accesorios Suministrados5Símbolos Utilizados en este Manual UbicaciónContenido CaracterísticasMenu button p 5Función de Mando a Distancia5Instalación de las Pilas 5Panel Trasero 5Panel de ControlConexión a Caja de Cable o Caja de Satélite Conexión5Conexión Básica Conexión de Cable de AntenaConexión de Cable de Vídeo Delantera 5Conexión de Dispositivo ExternoConexión de Cable de S-video o de Vídeo Trasera Cable RCA de vídeo5Menú Principal 5Configuración InicialAjuste Inicial Français English 5Selección de IdiomaEspañol Para utilizar los botones numéricos 5Ajuste de VolumenPara VER LA Televisión 5Selección de CanalModo Digital 5Para Cambiar entre Cada Modo5Información de Pantalla Modo AnalógicoZoom 5Modo de Visualización de Pantalla del Televisor5Temporizador de Apagado Ancho BuzónPara agregar o borrar otros canales, repita los pasos Ajuste Opcional5Agregar/Borrar Canales Utilice VOL X / Y para seleccionar Agregar o BorrarSUBTIT2 C2 y TEXTO2 T2 5Ajuste de ImagenVOL Y Modo de Subtítulos SUBTIT1 C1 y TEXTO1 T1Utilice CH Para seleccionar DTVCC, y luego Luego presione VOL5Estilo Dtvcc Chip Cuando no haya configurado su contraseña, introduzcaPara Ajustar las Subcategorías Clase de TVVuelva a introducir la contraseña en el espacio Clase de Mpaa5Guía de Solución de Problemas Solución DE ProblemasDe no emisión. Apunte con el mando a distancia MantenimientoSintonice la emisora de radio AM en una frecuencia Información EMO Garantía Limitada

CR202EM8 specifications

The Emerson CR202EM8 is an advanced temperature and humidity controller designed to meet the needs of various applications, including HVAC systems and refrigeration units. This device showcases Emerson's commitment to innovation and efficiency, providing users with reliable performance and enhanced operational capabilities.

One of the main features of the CR202EM8 is its precise temperature control. With a temperature range of -40°C to 85°C, it allows for versatile applications in both commercial and residential settings. The controller’s high accuracy ensures that users can maintain optimal conditions, whether in a cold storage facility or a temperature-sensitive environment.

Another key characteristic of the CR202EM8 is its integrated humidity sensor. This feature allows for real-time monitoring and control of humidity levels, which is crucial in preventing mold growth and preserving product integrity in various storage situations. The device supports both temperature and humidity control, making it a comprehensive solution for those looking to optimize their environmental conditions.

The CR202EM8 also boasts user-friendly programming and a clear display interface. The intuitive menu system simplifies setup and configuration, enabling users to quickly adjust settings according to their specific requirements. Additionally, the backlit LCD display ensures that data is easily readable, even in low-light environments.

Durability is another important aspect of the CR202EM8. Built with high-quality materials, this controller is designed to withstand the rigors of various industries. Its robust construction ensures longevity and reliability, contributing to lower maintenance costs and reduced downtime.

Furthermore, the Emerson CR202EM8 is equipped with advanced communication capabilities. It supports various protocols, including MODBUS, facilitating integration into existing systems. This feature allows for seamless data exchange and remote monitoring, enhancing operational efficiency.

Energy efficiency is also a significant consideration in the design of the CR202EM8. By implementing smart algorithms, the controller optimizes energy consumption, leading to lower utility bills and a reduced carbon footprint.

In conclusion, the Emerson CR202EM8 temperature and humidity controller embodies cutting-edge technology with its precision control, integrated humidity monitoring, user-friendly interface, durability, advanced communication capabilities, and energy-efficient operation. These features make it an ideal choice for businesses and homeowners looking to maintain reliable and optimal environmental conditions.
Top Page Image Contents