Bang & Olufsen 8 manual System modulator, Link frequency, Recommended setups

Page 23

23

System modulator

If your link room is an audio setup, for example, a BeoLink Active/Passive, and you choose to set up a non-linkable TV in the same room, you must set the system modulator to ON, as described below. The factory setting is AUTO, which must be used if you use a linkable Bang & Olufsen TV.

To switch on the system modulator …

>Press TV to switch on the television.

>Press MENU to bring up the TV SETUP menu and press to highlight CONNECTIONS.

>Press GO to bring up the CONNECTIONS menu and press to highlight LINK.

>Press GO to bring up the LINK menu, and press to highlight MODULATOR.

>Press  or  to reveal ON.

>Press GO to store the setting, or …

>… press EXIT to leave all menus without storing.

LINK

FREQUENCY 599

TV SYSTEM

B/G

MODULATOR AUTO

store GO

The LINK menu is only available when a local TV source is selected.

Link frequency

If, for example, a TV channel in your area is broadcasted on the same frequency as the BeoLink system uses, 599 MHz, you must tune the system modulator to an unused frequency. When you change the link frequency in the main room system, you may have to change the link frequency in the link room system accordingly.

To change the link frequency …

>Press TV to switch on the television.

>Press MENU to bring up the TV SETUP menu and press to highlight CONNECTIONS.

>Press GO to bring up the CONNECTIONS menu and press to highlight LINK.

>Press GO to bring up the LINK menu, FREQUENCY is already highlighted.

>Press  or  or 0 – 9 to find an unused frequency.

>Press GO to store the setting, or …

>… press EXIT to leave all menus without storing.

Recommended setups

If your television is the video master of a BeoLink setup, we recommend that a BeoCenter 2 or DVD 2 is connected to the AV1 socket and HDR 2 must be connected to the AV4 socket.

Simultaneous sources:

While watching one source on the television screen in the main room, you can either record a different source or distribute one other source to a link room.

Image 23

Contents BeoVision Risk of Electric Shock Do not Open Contents Such as Format Switch on the televisionDisplayed information and menus Bring up a channel list Watch TVSelect a TV channel SAT SOUND* on Beo4 Adjust volume or mute the soundYou can adjust volume or mute the sound at any time Sound type or languagePicture formats to choose from … Speaker combinationSpeaker combinations Basic teletext functions TeletextStore favourite teletext pages Day-to-day use of Memo pages Menu overview Advanced operation Advanced operationPress to bring up the Peripheral Press a source button* to switch On connected equipmentPeripheral Unit Controller menu While equipment menus are shown … Universal Beo4 operationUse equipment menus Use equipment in a link roomTo bring up the computer Picture … Use your television as a computer monitorBring up the computer image on the screen 1024 × 768, 1280 × 720Operate your television in Option 4 … One remote control for both televisionsTwo televisions in the same room Connect your audio system Option settingConnect and operate an audio system Video sound recording Use an integrated audio/video systemPress or to reveal on Press GO to store the setting Timer Play in link roomTo make your television part of a Timer Play … Press TV to switch on the televisionUse a link room source present in both rooms … Link room operationUse sources present only in one of the rooms … Use a main room source present in both rooms …Link connections BeoLink Distribute sound and pictureLink frequency Recommended setupsSystem modulator To disable the internal tuner … Tuner setupTuning and preference settings Tuning and preference settingsFirst-time setup of your television Sequence of menus in first-time setup Press GO to be able to select another socket group What is connected?Register additional video equipment Press or to move between sockets in the groupAutomatic standby … What’s on the AV1 AV4 menu …Select speaker types Loudspeaker setup surround soundAlways select your most powerful speakers as front speakers To set the speaker distances … Set speaker distanceTo calibrate the sound level … Loudspeaker setup surround soundCalibrate the sound level To choose a speaker combination … Choose a speaker combinationPress GO to bring up the Sound System menu See the name of the active sound systemTo see the active sound system … Page Delete channels … Edit tuned channelsMove or delete tuned channels Move channels …Press or to find the individual characters in the name Name tuned channelsName channels … Adjust tuned TV channels manual tuning Manual Tuning Re-tune or add channels Re-tune via automatic tuningAdd new channels What’s on the Picture menu … Adjust picture and sound settingsChange brightness, colour or contrast Speaker combinations Sound adjustmentsWhat’s on the Sound menu … Choose menu language Placement, sockets and connections Placement, sockets and connectionsHandling your television Set up the televisionAlways remove cover 1 before removing cover Additional video equipment Video signalsConnections LoudspeakersAudio system IR-transmittersComputer System Module sockets Connection panelsStandard sockets Front Module with the front facing the frontWith the chip facing away from the television Watch and copy from a Camcorder Sockets for temporary connectionsWatch digital pictures on your television Changing the Beo4 batteries MaintenanceCleaning BeoLink Beo4 remote controlFirst-time setup HeadphonesPeripheral unit MaintenancePlacement Timer Master LinkWeee Environmental protection Waste Electrical and Electronic Equipment1996-2008 DTS, Inc All Rights Reserved For your information …