Bang & Olufsen 8 manual Always remove cover 1 before removing cover

Page 47

47

	3
1	2

A	B

To remove the two covers for the main connection panel, first pull out, then pull down at the bottom

–also if the television is placed on a stand. To release the cover for the Smart Card and CA- module (3), press the cover to the right.

Always remove cover 1 before removing cover 2.

When you have made all the connections and fastened the cables, mount the cable covers again.

IMPORTANT! For safety reasons the mains supply cable must be fastened to the cable strip (A). All cables must be run through the cable strip (B).

However, if your setup includes a VGA connection, do not run the VGA cable through the cable strip

(B). Instead, use the two screws in the VGA plug to fasten it to the socket.

If you are going to connect any other equipment to the television, do not connect it to the mains yet!

The supplied mains cord and plug are specially designed for the television. If you change the plug or in any way damage the mains cord, it will affect the TV picture adversely!

When connections are complete and the cables have been secured as described, switch on the mains supply. A tiny, red light appears. The system is in standby mode and ready to be used.

If your television is set up on its own, you can now tune in channels as explained in the chapter ‘First-time setup of your television’ on page 26.

Image 47

Contents BeoVision Risk of Electric Shock Do not Open Contents Such as Format Switch on the televisionDisplayed information and menus Bring up a channel list Watch TVSelect a TV channel SAT SOUND* on Beo4 Adjust volume or mute the soundYou can adjust volume or mute the sound at any time Sound type or languagePicture formats to choose from … Speaker combinationSpeaker combinations Basic teletext functions TeletextStore favourite teletext pages Day-to-day use of Memo pages Menu overview Advanced operation Advanced operationPress to bring up the Peripheral Press a source button* to switch On connected equipmentPeripheral Unit Controller menu While equipment menus are shown … Universal Beo4 operationUse equipment menus Use equipment in a link roomTo bring up the computer Picture … Use your television as a computer monitorBring up the computer image on the screen 1024 × 768, 1280 × 720Operate your television in Option 4 … One remote control for both televisionsTwo televisions in the same room Connect your audio system Option settingConnect and operate an audio system Video sound recording Use an integrated audio/video systemPress or to reveal on Press GO to store the setting Timer Play in link roomTo make your television part of a Timer Play … Press TV to switch on the televisionUse a link room source present in both rooms … Link room operationUse sources present only in one of the rooms … Use a main room source present in both rooms …Link connections BeoLink Distribute sound and pictureLink frequency Recommended setupsSystem modulator To disable the internal tuner … Tuner setupTuning and preference settings Tuning and preference settingsFirst-time setup of your television Sequence of menus in first-time setup Press GO to be able to select another socket group What is connected?Register additional video equipment Press or to move between sockets in the groupAutomatic standby … What’s on the AV1 AV4 menu …Select speaker types Loudspeaker setup surround soundAlways select your most powerful speakers as front speakers To set the speaker distances … Set speaker distanceTo calibrate the sound level … Loudspeaker setup surround soundCalibrate the sound level To choose a speaker combination … Choose a speaker combinationPress GO to bring up the Sound System menu See the name of the active sound systemTo see the active sound system … Page Delete channels … Edit tuned channelsMove or delete tuned channels Move channels …Press or to find the individual characters in the name Name tuned channelsName channels … Adjust tuned TV channels manual tuning Manual Tuning Re-tune or add channels Re-tune via automatic tuningAdd new channels What’s on the Picture menu … Adjust picture and sound settingsChange brightness, colour or contrast Speaker combinations Sound adjustmentsWhat’s on the Sound menu … Choose menu language Placement, sockets and connections Placement, sockets and connectionsHandling your television Set up the televisionAlways remove cover 1 before removing cover Additional video equipment Video signalsConnections LoudspeakersAudio system IR-transmittersComputer System Module sockets Connection panelsStandard sockets Front Module with the front facing the frontWith the chip facing away from the television Watch and copy from a Camcorder Sockets for temporary connectionsWatch digital pictures on your television Changing the Beo4 batteries MaintenanceCleaning BeoLink Beo4 remote controlFirst-time setup HeadphonesPeripheral unit MaintenancePlacement Timer Master LinkWeee Environmental protection Waste Electrical and Electronic Equipment1996-2008 DTS, Inc All Rights Reserved For your information …