Bang & Olufsen 8 manual Loudspeaker setup surround sound, Select speaker types

30

Loudspeaker setup – surround sound

Add four Power Link speakers and a BeoLab subwoofer to your setup and you have a surround sound system.

A surround sound setup fits easily into your living room. Let the picture determine your ideal listening and viewing position. You get the best sound experience in the area created by the speakers.

Select speaker types

Connect the loudspeakers­ to the Power Link sockets on the television. Refer to the Guide enclosed with the loudspeakers­ for specific information about how to set them up. Refer to ‘Connection panels’ on page 51 for information about the Power Link sockets.

Remember to set the L–R–LINE switch on both the front and rear set of speakers to L or R (left and right sound channel) to indicate their position in each set. Set the left speakers to L and the right speakers to R.

To register the speaker types …

>Press MENU to bring up the TV SETUP menu and press  to highlight SOUND.

>Press GO to bring up the SOUND menu and press  to highlight SPEAKER TYPE.

>Press GO to bring up the SPEAKER TYPE menu.

>Press  or  to reveal your speaker type and  to move on to the next speaker set. Choose NONE if no speakers are connected.

>If you have a BeoLab subwoofer, press  to move the cursor to SUBWOOFER and press  to change the field to YES.

>Press GO to store or EXIT to leave the menu without storing.

SPEAKER TYPE

FRONT	BEOLAB 8000
REAR	BEOLAB 4
SUBWOOFER	YES

store GO

Always select your most powerful speakers as front speakers.