If you have placed your BeoVision 8 in a room where you already have a
Two televisions in the same room | 17 |
One remote control for both televisions
Bang & Olufsen television, and commands from Beo4 can be received by both televisions, you must change the option setting of BeoVision 8. This prevents simultaneous activation of both televisions.
For your television to function properly, it is essential that the television is set to the correct Option:
To set your television for Option 4 …
>While holding the • button on Beo4, press LIST.
>Let go of both buttons.
>Press LIST repeatedly to display OPTION? on Beo4 and press GO.
>Press LIST repeatedly to display V.OPT on Beo4 and press 4.
Operate your television in Option 4 …
Normally, you can activate a source, such as TV, simply by pressing the relevant source button on Beo4. However, when you set your television to Option 4, you must do the following:
>Press LIST repeatedly until LINK* is shown in the Beo4 display.
>Press a source button, such as TV.
*In order to display LINK on Beo4, you must add it to the Beo4 list of functions. For further information, refer to the Guide enclosed with Beo4.
BeoVision 8 |
Option 4 |
LIST |
LINK |
TV |
TV |
In order to use teletext on a television you have set to Option 4, you must set up Beo4 to ‘VIDEO 3’, but this limits the Beo4 functions that can be used with televisions set to other Options. For further information, refer to the Guide enclosed with Beo4.