9
Speaker combination | Picture format |
If you connect loudspeakers to your television, you can change the speaker combination at any time.
Press repeatedly to display | LIST |
SPEAKER on Beo4 |
|
SPEAKER | |
Press to select a speaker | 1 – 5 |
combination |
|
Press to adjust the balance |
|
between the front and rear |
|
speakers |
|
Press to adjust the balance |
|
between the left and right |
|
speakers |
|
Press to remove SPEAKER from | EXIT |
the Beo4 display and return to |
|
the source you were using |
|
Speaker combinations
SPEAKER 1 … Sound in the centre speaker only. SPEAKER 2 … Stereo sound in the front speakers.
Subwoofers are active.
SPEAKER 3 … The centre speaker, front speakers and subwoofers are active.
SPEAKER 4 … The front speakers, surround speakers, and subwoofers are active.
SPEAKER 5 … Surround sound from all speakers and subwoofers.
Available speaker combinations depend on the number of connected speakers.
Select a picture format to optimise the picture.
Press repeatedly to display | LIST | ||
FORMAT on Beo4 |
| ||
FORMAT | |||
Press if you want to optimise the | GO | ||
picture, or … |
| ||
… press the number of the | 1 – 4 | ||
desired picture format |
| ||
If you have chosen Format 1 |
| ||
or Format 4 … |
| ||
Press | or | to select variations |
|
of this format |
| ||
If you have chosen Format 1* |
| ||
or Format 2 … |
| ||
Press | or | to move the |
|
picture up and down |
| ||
Press to leave the FORMAT | EXIT | ||
function |
|
|
*Pictures in 4:3 format cannot be moved up and down.
Picture formats to choose from …
FORMAT 1 … For standard TV pictures. Three variations are available: 4:3, 15:9 and Panoramic view (for the largest picture).
FORMAT 2 … For
FORMAT 3 … For genuine 16:9
FORMAT 4 … A video signal in Format 4 uses the 16:9 format and removes any bars at the sides. A graphics signal, for example from a PC, in Format 4 displays the centre part of the picture. When displaying a graphics signal in Format 4, you can select the left or right part of the picture with and , respectively.
To temporarily remove the picture from the screen, press LIST repeatedly to display P.MUTE on Beo4, then press GO. To restore the picture again, press any source button, such as TV.
NOTE! For further information about how to connect speakers to the television, refer to the chapter ‘Connection panels’ on page 51.