SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/DVD Combo or a TV/VCR Combo, follow the Steps below:
1.Turn on your TV/DVD Combo and insert a DVD, or if TV/VCR Combo, insert a video cassette.
2.On Teleport™ press DVD/VCR once; it will
blink once. Then press and hold SETUP until the
DVD/VCR mode key blinks twice.
3.Use the “Manufacturer’s Codes” starting on page 28 to locate the brand name and enter the first
Note: If the DVD/VCR mode key did not blink twice after entering the last digit of the code, repeat steps 2 and 3 entering the same code again.
If the setup code that works for your combo device (for example, TV/DVD combo) also has a separate TV code listed, programming the separate TV code into Teleport™ is necessary for TV volume and channel control. See “Programming Device Control” on page 9.
4.Aim Teleport™ at your combo device (for example TV/DVD combo) and press PWR once. The device should turn off. If it does not respond,
| repeat steps 2 and 3, trying each code listed for | |
PWR | your brand until one works. If it still does not | |
respond, try searching for the code. See | ||
| ||
| “Searching for Your Code” starting on page 12. |
5.For future reference, write down each working device code in the boxes below:
TV/VCR or TV/DVD Code
TV Code (if used)
11