Wayne-Dalton WDHC-20 user manual Deleting a Single Learned Key

Deleting a Single Learned Key

This process returns the LEARNED Teleport™ key to its original programming for the mode you select. You can also delete LEARNED programming by teaching a different function to the key. See “Programming a Learned Key” on page 14.

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1.On Teleport™ select the mode, containing the key to be deleted.

2. Press and hold SETUP until the last-selected mode key blinks twice.

3. Enter 976 on the numeric keypad.

4.Press a mode key once (e.g., TV, DVD/VCR, SAT, AMP.)

5.Press the key on Teleport™ containing the learned function to be deleted, twice. The remote will blink twice.

6.Repeat Steps 2 through 4 for another key.

To exit programming, press and hold SETUP.

Deleting All Learned Keys in a Specific Mode

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1. On Teleport™ select the mode to be deleted.

2. Press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 976 on the numeric keypad.

3.Press a mode key twice (e.g. TV, DVD/VCR, SAT, AMP) to clear all the learned keys for that mode. The LED will blink twice.

4.Repeat Step 2 to delete another mode. To exit programming, press and hold SETUP.

15