Barco MCFD 1219 - MCFD 1219 TS user manual ON-SCREEN Display OSD Menus, How to use the OSD

3.ON-SCREEN DISPLAY (OSD) MENUS

3.1 How to use the OSD

Proceed as follows:

1	Press the Menu key (4) on the front to display
	the OSD main menu.
	Note:
	It may be possible that the OSD menu does
	not appear. If this is the case, the front
	Controls are locked. To unlock them, please
	follow the procedure described in § 3.2 below.
2	Press the <+> key (6) or <-> key (5) to scroll to
	the desired menu item.
3	Press the Menu key (4) to activate the
(4) (5) (6)	selected function or to enter the selected
	secondary menu.
4	If you have activated a function:
	a)Press the <+> key (6) or <-> key (5) to
	change the value.
	b)Press the Menu key (4) to enter the new
	value and return to the menu.
5	To exit the OSD while saving the changes,
	select Save & Exit.
	To exit the OSD without saving the changes,
	select Cancel.

	Main Menu
Highlighted bar	- (Down)	+ (Up)
	Brightness	35
	Contrast	50
	Auto Adjust
	H Position	75
	V Position	29
	Color	>
	Clock	>
	Languages	>
	Input Type	>
	Lock Controls
	Cancel
	Save & Exit

Note: The OSD disappears automatically after an inactivity period of 30 seconds.

The color of the highlight bar indicates the status of the mode.

RED indicates the function is selected and ready to be adjusted.

Blinking RED indicates OSD is in parameter adjusting mode.

MFCD 1219 (TS) User's Guide 12