2To secure the panel, slide forward the locks on both sides of the mounting plate. Lock the panel with one screw at both sides (D).
D
2.3 Connecting the signals
To connect the video & sync signals:
1Connect one end of the appropriate video cable to the corresponding video input of the monitor.
Analog video: Connect to input (2)
DVI: Connect to input (3)
2Connect the other end of the video cable to the video output of your video source. Analog video: Computer graphics board with analog video output
DVI: Computer graphics board with digital video output
(1) | (2) | (3) |
To connect the power:
1Connect one end of the proper power cable to the AC input of the 12V DC adapter.
2Connect the 12V supply of the 12V DC adapter to the DC input (1) of the monitor.
3Connect the other end of the power cord to a grounded power outlet.
MFCD 1219 (TS) User's Guide | 10 |