Barco MCFD 1219 - MCFD 1219 TS user manual Clock Menu

To perform the Autobalance function, you need to select a proper test pattern before performing the function.

Proceed as follows:

1You must have installed the Barco NioWatch software.

2Right-click on the NioWatch systray icon.

3Select Test Patterns from the pop-up menu.

4Select the SMPTE test pattern.

5Now perform the function Autobalance from the MFCD 1219 (TS) control panel.

6When finished, click on the test pattern to close it.

Clock Menu

Clock Menu

- (Down)	+ (Up)
OSD Position
Clock	1344
Clock Phase	4
Main Menu	>
A1 1024 x 768 - 60.1	48.4k

Function	Description
OSD Position	To display the OSD to your preferred
	position.
Clock	To adjust the function only when
	characteristics are blurred.
Clock Phase	To adjust ADC sampling clock phase.
Main Menu	To return to Main Menu.

MFCD 1219 (TS) User's Guide 15