Starting up, Install the software | Barco MCFD 1219

2.4 Starting up

Proceed as follows:

1Switch on the computer.

2Switch on the display by pushing the Power key (8).

3If necessary, select a suitable resolution in the computer operating system. Please refer to Appendix A, "Possible resolutions" in the back of this manual.

Note: The recommended resolution for best image quality is 1280x1024 at 60 Hz.

(8)The microcontroller in the display checks if the connected video signal has been adjusted before, and if these adjustments have been stored in the memory. There are 2 possibilities:

a)The video signal has been adjusted and stored in the memory.

In this case, the display switches to this memory location (the so-called mode) and the image will need no further adjustments.

b)The video signal has not been adjusted and stored yet.

In this case, the display will auto-size the picture and store the settings in one of the user modes.

2.5 Install the software

NioWatch software:

Insert the CD-ROM in the CD-ROM drive. The CD-ROM starts automatically. Please follow the instructions on the screen.

The CD-ROM contains user instructions about the usage of the NioWatch.

Touch panel software:

Please refer to the TouchKit installation & user manual on CD-ROM.

MFCD 1219 (TS) User's Guide